Pioneer VSX-LX303 Instruction Manual Download Page 128

Page: 128 / 157

128

≫

≫

≫

≫

≫

≫

Setting Item

Default Value

Setting Details

AirPlay Password -

You can set a password of up to 31 characters so

that only registered users can use AirPlay

1. Press ENTER to display the Edit screen.

2. Select a character or symbol with the cursors

and press ENTER.

Repeat it to input 31 or less characters.

"A/a": Switches between upper and lower cases.

(Pressing MODE on the remote controller also

toggles between upper and lower cases.)

"←" "→": Moves the cursor to the arrow

direction.

": Removes a character on the left of the

cursor.

": Enters a space.

• To select whether to mask the password with



" or display it in plain text, press +Fav on

the remote controller.

•

Pressing CLEAR on the remote controller will

remove all the input characters.

3. After inputting, select "OK" with the cursors and

press ENTER.

The input password will be saved.

Usage Data

As a means of improving the quality of our products

and services, we may collect information about

your usage over the network. Select "Yes" if you

agree to our collecting this information. Select "No"

if you do not want us to collect this information.

•

You can set this after confirming the Privacy

Policy. When you select "Usage Data" and press

ENTER, the Privacy Policy is displayed. (The

same screen is displayed once also when setting

up the network connection.) If you agree to the

collection of the information, this setting also

becomes "Yes". Note that if you agree to the

information will not be collected.

Setting Item

Default Value

Setting Details

Network Check

You can check the network connection.

Press ENTER when "Start" is displayed.

• Wait for a while if "Network" cannot be selected. It will appear when the network feature

is started.

Bluetooth

Setting Item

Default Value

Setting Details

Bluetooth

Select whether or not to use the BLUETOOTH

function.

"On": Enables connection with a BLUETOOTH

wireless technology enabled device by using the

BLUETOOTH function. Select "On" also when

making various BLUETOOTH settings.

"Off": When not using the BLUETOOTH function

Auto Input

Change

The input of the unit will automatically be switched

to "BLUETOOTH" when connection is made from a

BLUETOOTH wireless technology enabled device

to the unit.

"On": The input will automatically become

"BLUETOOTH" when a BLUETOOTH wireless

technology enabled device is connected.

"Off": The function is disabled.

• If the input is not switched automatically, set to

"Off" and change the input manually.

Auto Reconnect

This function automatically reconnects to the

BLUETOOTH wireless technology enabled device

connected last when you change the input to

"BLUETOOTH".

"On": When this function is to be used

"Off": When this function is not to be used

•

This may not work with some BLUETOOTH

wireless technology enabled devices.

Summary of Contents for VSX-LX303






























































































































































Search results

Summary of Contents for VSX-LX303

Reviews:

Related manuals for VSX-LX303

Brands by name

Popular brands

Pioneer VSX-LX303, Instruction Manual

Search results

Summary of Contents for VSX-LX303

Reviews:

Related manuals for VSX-LX303

Brands by name

Popular brands