31
En
Other Operations
English
Energy saving settings
(ENERGY SAVE)
The power control function allows screen brightness to
be suppressed as a means of lowering power
consumption and reducing display deterioration.
1
Press the MENU button to display the menu
screen.
MENU
INPUT1
PICTURE
SCREEN
SETUP
OPTION
:
0
:
0
:
0
:
0
:
0
:
0
CONTRAST
:
0
BRIGHTNESS
R.LEVEL
G.LEVEL
B.LEVEL
H.ENHANCE
V.ENHANCE
PICTURE RESET
2
Use the
2
/
3
buttons to select [OPTION].
MENU
INPUT1
:
:
ENERGY SAVE
SCREEN MGT.
:
OFF
:
ORBITER
OFF
:
MASK CONTROL
ON
:
AUTO SET UP MODE
INACTIVE
:
AUTO FUNCTION
OFF
:
AUDIO OUT
FIXED
STANDARD
LANGUAGE
ENGLISH
PICTURE
SCREEN
SETUP
OPTION
Other Operations
MENU
2
/
3
5
/
∞
SET
MENU
5
/
∞
SET
2
/
3
Main operating
panel
Remote control
Under factory default settings, the screen display
contents change as follows:
*
The color and brightness of the current image are displayed in
inverse values. The respective RGB color output levels are
inverted with light areas appearing dark and dark areas
appearing light.
Reminders
÷
If set to [ONCE], after the screen management program ends,
this part of the display changes to the [OFF] message. To
continue the screen management program, scroll using the
2
/
3
buttons to select [ONCE] again or change to the option,
[REPEAT].
÷
During screen management operation while set to [ONCE] or
[REPEAT], if the display’s MAIN POWER switch is turned OFF,
the screen management program ends. This part of the display
changes to show the [OFF] message. To continue with screen
management program, use the
2
/
3
buttons to select [ONCE]
or [REPEAT] again.
6
Use the
5
/
∞
buttons to select [TIME TO
ACTIVATE].
SET
MENU
:
:
RETURN
EXIT
SCREEN MGT.
REPEAT
STATUS
01H00M
TIME TO ACTIVATE
START
7
Use the
2
/
3
buttons to set the time
for
the
screen management program to begin.
When the
2
/
3
buttons are pressed, the screen
management operation can be set from 0 to 24 hours
in 10-minute intervals.
8
Use the
5
/
∞
buttons to select [START].
SET
MENU
:
:
SET
EXIT
SCREEN MGT.
REPEAT
STATUS
00H10M
TIME TO ACTIVATE
START
Note
The [SCREEN MGT.] setting affects all input sources.
Set
[ONCE]
Set
[REPEAT]
Inverse
image*
White mask
display
Power standby mode
Screen management
function ends here
Inverse
image*
White mask
display
Power
standby
mode
Inverse
image*
This cycle repeats
10 minutes
30 minutes
10 minutes
30 minutes
10 minutes
24 hours
[TIME TO
ACTIVATE]
(set in step 7)
[TIME TO
ACTIVATE]
(set in step 7)
9
Press the SET button.
The set value will be stored in memory, and the
screen will return to that shown in step 2.
The timer begins when the
SET
button is pressed,
and after passage of the time set in step 7, the screen
management program will begin operating.
10
When finished with the setting, press the MENU
button to return to the normal screen image.
