22
En
Operation
English
1
Press the remote control’s POINT ZOOM
button.
.
66.0
22.1
R12
24
10
ZOOM
P.ZOOM
SCROLL
x 1.5
Zoom-Area subscreen
Pressing the
POINT ZOOM
button causes the zoom ratio
to cycle through the following options:
Reminders
¶
While using the POINT ZOOM function, the screen size can-
not be changed.
¶
When using a plasma display panel in a profit-making activity or
when exhibiting images publicly, using the screen size function
to compress or stretch the image may result in infringement of
the copyrights of the image's owner(s).
4
PARTIAL
*Supported only on PDP-505CMX/PDP-504CMX
The [PARTIAL] setting is available only during input from
a computer (1280 x 1024 input only).
The input signal and the screen maintain a dot to line ratio
of 1:1; the appearance is highly faithful to the source.
However, to maintain the 1:1 ratio, a portion of the display
does not appear on the screen.
Use the
5
/
∞
buttons to adjust the vertical position of the
video image on the screen.
5
ZOOM (*Supported only on PDP-434CMX)
The [ZOOM] setting is available only during input from
a computer (1280 x 1024 input only).
A portion of the display does not appear on the screen.
Use the
5
/
∞
buttons to adjust the vertical position of the
video image on the screen.
Moving the screen position
upward or downward
Press the
5
/
∞
buttons.
When playing a [PARTIAL] or [ZOOM] image (1280 x 1024
input only) from a computer, the vertical position of the
screen image can be adjusted. However, adjusted positions
cannot be stored in memory.
Note
The image cannot be horizontally repositioned.
Operation
768 lines
1024 lines
POINT
ZOOM
DISPLAY
5
/
∞
/
2
/
3
3
OFF
3
x 1.5
3
x 2
3
x 3
Enlarging one part of the screen
(POINT ZOOM)
This panel allows enlarging of the screen image by ratios
of [x 1.5], [x 2], and [x 3]. When enlarging the display
screen, the
5
/
∞
/
2
/
3
buttons can be used to move the
enlarged viewing area around the screen.
¶
The possible zoom range can be confirmed by viewing the
Zoom-Area subscreen at the upper right of the main screen.
The Zoom-Area subscreen appears for approximately 3
seconds whenever the
POINT ZOOM
button, the
DISPLAY
button or one of the
5
/
∞
/
2
/
3
buttons is pressed.
768 lines
1024 lines
