Pioneer PDP-42MXE20 Technical Manual Download Page 31

Page: 31 / 262

Installation Procedures

Ref. No.

Terms

3.4 Installation Procedures

3.4.1 Transportation precautions

• Once the shipping container is opened, transporting the unit in its packaging should be handled by two or more

people. To avoid injury or damage, do not lift the package by its packing bands.

• When transporting or storing the unit, always position it vertically - never horizontally. Horizontal transportation or

storage invalidates the product warranty.

• In transportation or storage of products in original packing, never stack more than three units high.

• For transportation or storage, observe the warnings and instructions on the upper face of the carton.

• The Plasma Display is made of glass. Please handle the panel carefully to prevent it from being damaged.

3.4.2 Unpacking

PDP-50MXE20

The original packing material can be re-used to safely ship the Plasma Display. When repacking, it is important to use

the material in the same way as when the unit originally shipped. Failure to pack the panel correctly can damage the

Plasma Display.

1) Packing specifications; 1340 mm (W)

900 mm (H)

365 mm (D), 50 kg

Upper Carton

Carton

Reinforce Pad

Pad

Mirror Mat

Power Cord

Remote Control Unit

Dry Cell Battery (R6P, AA)

Vinyl Bag’s Assembly

Wiping Cloth

Operating Instructions

Caution Sheet

Warranty Card

Warranty Card Vinyl Pouch

Vinyl Bag (S)

Speed Clamp

Binder

Ferrite Core (S)

Vinyl Bag

[50MXE20 : 42MXE20]

Summary of Contents for PDP-42MXE20







































































































































































































































































Search results

Summary of Contents for PDP-42MXE20

Reviews:

Related manuals for PDP-42MXE20

Brands by name

Popular brands

Pioneer PDP-42MXE20, Technical Manual

Search results

Summary of Contents for PDP-42MXE20

Reviews:

Related manuals for PDP-42MXE20

Brands by name

Popular brands