Pioneer PDP-42MXE20 Technical Manual Download Page 145

Page: 145 / 262

145

Before Beginning Adjustments

Integrator Mode

This mode provides an adjustment function for integrator options.

This mode has white-balance adjustment and various detailed settings in addition to the items in the menu mode.

For details, refer to section 5.4, “Integrator Mode” (pg. 190).

RS-232C Adjustment

In this mode, a personal computer is used to perform various adjustments and settings.

There are some items that can only be configured in this mode.

For details, refer to section 5.5, “RS-232C Adjustment” (pg. 236).

5.1.2 Combined Use of the Remote Control, Main-control Panel, and RS-232C Commands

• The remote control and main-control panel can be operated together.

(Example) It is possible to access the Menu Mode using the main-control panel then perform an adjustment

using the remote control.

• With the remote-control (or main-control panel) buttons and RS-232C commands, the most resent control has priority.

When connecting multiple sets and in this mode, assign an ID before making adjustments or settings.

Note

Summary of Contents for PDP-42MXE20







































































































































































































































































Search results

Summary of Contents for PDP-42MXE20

Reviews:

Related manuals for PDP-42MXE20

Brands by name

Popular brands

Pioneer PDP-42MXE20, Technical Manual

Search results

Summary of Contents for PDP-42MXE20

Reviews:

Related manuals for PDP-42MXE20

Brands by name

Popular brands