139
Speaker System: PDP-S53-LR/PDP-S54-LR
2) Connect the cords
(Turn off the power of all connected units before
connecting the cords.)
Use the provided speaker cords to connect the
R/L speaker jacks of the monitor to the speaker jacks of
the speakers.
Once the cords have been connected, pull on the cords
lightly to make sure that they have been connected
firmly to the speaker jacks. An improper connection
might result in the sound being interrupted or the
appearance of noise in the output sound.
3) Care and Maintenance
When the cabinet gets dirty...
• Wipe with a lit-free, soft, dry cloth.
If the cabinet is heavily soiled, soak a cloth in a neutral
detergent solution, wring well, and wipe the cabinet.
Remove any remaining moisture by wiping with a dry
colth.
If you want to use a chemical cloth for cleaning, read
any caution information provided with the chemical cloth
product.
• Do not use solvent such as thinner or benzine for
cleaning. These chemical can damage the surface finish,
deteriorating or stripping the coating.
• To remove dust from the speaker nets, use a vacuum
cleaner’s. Avoid applying the vacuum cleaner hose
directly to the speakers without using a brush adapter
or using a nozzle adapter.
• To prevent damage to the cabinet and speaker nets, do
not scrach or hit them with hard objects. Also, do not
stab the speaker nets with sharp objects.
Do not apply volatile chemicals such as insecticide on
the cabinet. Avoid leaving a rubber or vinyl products in
contact with the cabinet for prolonged periods. The
surface finish can deteriorate or the coating may be
stripped off.
Cord clampers
Remove the seal from the rear of the cord
clampers, attach the clampers in the desired
position, and clamp the cords into place.
Red
Black
Press the button of the speaker jack and keep it pressed
down as you insert the wire of the speaker cord and then
release the button.
Note that the speaker cords have positive and
negative ends, and that you should be sure to
insert them correctly.
[50MXE20]
