manualshive.com logo in svg

Pioneer PDP-42MXE20, Technical Manual

The Pioneer PDP-42MXE20 is a high-quality, 42-inch plasma TV known for its exceptional picture quality and immersive viewing experience. To ensure optimal performance and troubleshooting, download the free Service Manual and user manual from manualshive.com, offering comprehensive guidance on setup, usage, and maintenance.

Share
Download
background image

76

How to use the standard mounting components

[50MXE20 : 42MXE20]

4.1 Standard Mounting Components Features and Characteristics

In addition to reliability and vivid display resulting from its large screen area, brightness, and image quality, the Plasma

Display (PDP-50MXE20/PDP-42MXE20) is thin and lightweight. This panel can be mounted in locations not possible for

conventional displays.

We considered various mounting patterns and operating conditions during the design of the Plasma Display (PDP-

50MXE20/PDP-42MXE20). A wide range of standard mounting hardware is available for easy mounting.

Video Card: PDA-5003/PDA-5004

The video card makes video input and analog RGB input possible.

This product has a total of three lines: a COMPOSITE (1), S INPUT (1), and an analog RGB INPUT or COMPONENT

INPUT (1). Furthermore, it can handle three-line or two-line audio, thus increasing the uses for video presentations.

Table Top Stand: PDK-TS01/PDK-TS07

This on-board support designed for the Plasma Display enables vertical placement of the unit.

Tilt Mount Unit: PDK-5011

This mount permits tilting of the display downward from the horizontal by up to 25 degrees. Mount depth is 145 mm

or less (in vertical position, without optional speaker). This hardware permits a wide range of viewing angles.

Wall Mount Unit: PDK-WM01

Distance from the rear surface of the Plasma Display to the wall is 32 mm.

This mount provides installation holes for various wall-mounting arrangements. The mount is constructed so that it

can be easily attached to the main unit.

Ceiling Mount Unit: PDK-5012

Simple rod-type mounting hardware permits display panning over a range of 45 degrees and up to 25-degree downward

tilting from the horizontal. This hardware enables installation of the unit in a wide variety of locations.

Mobile Cart: PDK-5014

This is an extremely stable movable stand that one person can use to freely move the Plasma Display.

It can also be used to adjust the screen height and the screen angle to match the line of sight.

PDP Bracket: PDK-5005 (Can be used only with the PDP-50MXE20)

Can be used as a handle when moving the unit, or as a frame when wire-suspending it or hanging it on the wall. Most

suitable for temporary use when quick, easy, and safe attachment is necessary.

Speaker System: PDP-S53-LR (Can be used only with the PDP-50MXE20)/PDP-S54-LR (Can be used only with

the PDP-50MXE20-S)

Speaker System: PDP-S56-LR (Can be used only with the PDP-42MXE20)

Two way speakers feature 5 cm (2 in.) tweeter and 8 cm (3-3/16 in.) woofer in a vertical arrangement.

Summary of Contents for PDP-42MXE20







































































































































































































































































Reviews:

No comments

Related manuals for PDP-42MXE20

GE CARESCAPE Clinical Reference Manual preview
CARESCAPE
Brand: GE Pages: 24
GE Corometrics 250cx Series Operator'S Manual preview
Corometrics 250cx Series
Brand: GE Pages: 250
Targa 19" User Manual preview
19"
Brand: Targa Pages: 22
NDS DOMETIC BS12-100 Short Operating Manual preview
DOMETIC BS12-100
Brand: NDS Pages: 64
NCR XL15W User Manual preview
XL15W
Brand: NCR Pages: 46
Sam4s SAM4POS Reference Manual preview
SAM4POS
Brand: Sam4s Pages: 76
Daktronics Galaxy AE-3010 Manual preview
Galaxy AE-3010
Brand: Daktronics Pages: 79
Biolight Meditech WBP100 Manual preview
WBP100
Brand: Biolight Meditech Pages: 25
FEC AM-1022 Series User Manual preview
AM-1022 Series
Brand: FEC Pages: 22
MaxTech XT4888 User Manual preview
XT4888
Brand: MaxTech Pages: 10
HANNspree HF207HPB User Manual preview
HF207HPB
Brand: HANNspree Pages: 23
Kane KANE77 Manual preview
KANE77
Brand: Kane Pages: 15
Graco 2791VIB - iMonitor Digital Baby Monitor W Vibration Owner'S Manual preview
2791VIB - iMonitor Digital Baby Monitor W Vibration
Brand: Graco Pages: 12
Megellan VK-1239 Quick Start Manual preview
VK-1239
Brand: Megellan Pages: 6
Startax NSD 1705-00096 Manual preview
NSD 1705-00096
Brand: Startax Pages: 31
LOVATO ELECTRIC DMG900 RD Instruction Manual preview
DMG900 RD
Brand: LOVATO ELECTRIC Pages: 3
Parker 71-313 Series Assembly Instructions preview
71-313 Series
Brand: Parker Pages: 4
ViewSonic VX2456Sml User Manual preview
VX2456Sml
Brand: ViewSonic Pages: 25

Brands by name

Popular brands

Load more brands