Pioneer MVH-AV285BT, Owner'S Manual

Page: 22 / 112

22
Selecting the theme colour
A theme colour can be selected from 3 different colours.
1 Display the “ Theme ” screen.
2 Touch [ Theme ].
3 Touch the colour you want.
Theme menu
Adjusting the subwoofer
settings
p
This function is available only when “ Subwoofer ” is “ On ”.
 Using the subwoofer output on page 21
1 Display the “ Audio ” setting screen.
 Displaying the “ Audio ” setting screen on page 21
2 Touch [ Subwoofer Settings ].
3 Touch or to turn the subwoofer phase
to normal or reverse.
4 Touch or to adjust the subwoofer level
between -24 and 6.
5 Touch or to adjust the subwoofer
frequency.
The following items are available:
80Hz (default), 50Hz , 63Hz , 80Hz , 100Hz , 125Hz .
Switching the rear speaker
output
1 Turn the source off.
2 Display the “
Audio ” setting screen.
 Displaying the “ Audio ” setting screen on page 21
3 Touch [ Rear Speaker ].
4 Touch to switch “ Full ” (default) or
“ Subwoofer ”.
 When this function is set to “ Subwoofer
Settings ”, “ Preout ” is fixed to “ Subwoofer
Settings ”.
Switching the RCA rear output
When “ Rear Speaker ” is set to “ Subwoofer Settings ”, this
setting is fixed to “ Subwoofer Settings ”.
1 Display the “
Audio
” setting screen.
 Displaying the “
Audio
” setting screen on page 21
2 Touch [
Preout
] to switch “
Subwoofer
Settings
”(default) or “
Rear
”.
Boosting the bass
1 Display the “
Audio
” setting screen.
 Displaying the “ Audio ” setting screen on page 21
2 Touch [ Bass Booster ].
3 Touch to select the bass boost level from
0
to
+6
.
Setting the high pass filter
1 Display the “ Audio ” setting screen.

Displaying the “ Audio ” setting screen on page 21
2 Touch [High Pass Filter].
3 Touch the item.
The following items are available:
Off (default), 50Hz , 63Hz , 80Hz , 100Hz , 125Hz .
Using the equaliser
Recalling equaliser curves
There are seven stored equaliser curves that you can easily recall
at any time. Here is a list of the equaliser curves:
 S.Bass is a curve in which only low-pitched sound is boosted.

Powerful is a curve in which low- and high-pitched sounds
are boosted.

Natural is a curve in which low- and high-pitched sounds
are slightly boosted.

Vocal is a curve in which the midrange, which is the human
vocal range, is boosted.

Flat is a flat curve in which nothing is boosted.
 Custom1 is an adjusted equaliser curve that you create. If
you select this curve, the effect is applied to all AV sources.
 Custom2 is an adjusted equaliser curve that you create. If
you select this curve, the effect is applied to all AV sources.
p
The default setting is “ Powerful ”.
1 Display the “ Audio ” setting screen.

Displaying the “ Audio ” setting screen on page 21
2 Touch [ Graphic EQ ].
3 Touch the equaliser you want.
Customising the equaliser curves
You can adjust the currently selected equaliser curve setting
as desired. Adjustments can be made with a 5-band graphic
equaliser.
p
If you make adjustments when a curve “ S.Bass ”, “ Powerful ”,
“
Natural
”, “
Vocal
”, or “
Flat
” is selected, the equaliser curve
settings will be changed to “ Custom1 ” mandatorily.
p
If you make adjustments when the “
Custom2
” curve is
selected for example, the “ Custom2 ” curve will be updated.
p
“
Custom1
” and “
Custom2
” curves can be created common
to all sources.
1 Display the “ Audio ” setting screen.

Displaying the “ Audio ” setting screen on page 21
2 Touch [
Graphic EQ
].
3 Select a curve that you want to use as the basis
of customising.
4 Touch the frequency for which you want to
adjust the level.
p
If you trail a finger across the bars of multiple equaliser
bands, the equaliser curve settings will be set to the value of
the touched point on each bar.
22 < QRD3363-A > < QRD3363-A >
Audio adjustments Theme menu