Advanced setup
11
72
En
2
Select the THX CINEMA decoding format you
want.
For more on decoding formats see
Surround sound
formats
on page 90.
•
2
Pro Logic II /
2
Pro Logic IIx MOVIE
•
2
Pro Logic
•
Neo:6 CINEMA
3
When you're finished, select ‘Exit’.
You will return to the System Setup menu.
The Input Assign menu
You only need to make settings in the Input Assign menu
if you didn’t hook up your digital equipment according to
the default settings for the digital inputs, or if you have
connected equipment using component video cables.
•
Select ‘Input Assign’ from the System Setup
menu.
The Input Assign menu appears on screen:
Assigning the digital inputs
• Default settings:
Digital-1
(optical) –
TV/SAT
Digital-2
(optical) –
CD-R
Digital-3
(coaxial) –
DVD/LD
Digital-4
(coaxial) –
CD
You only need to do this if you didn’t hook up your digital
equipment according to the default settings for the
digital inputs (see above). This setting tells the receiver
what digital equipment is hooked up to which terminal so
the buttons on the remote correspond to what you have
hooked up.
1
Select ‘Digital-In Select’ from the Input Assign
menu.
2
Select the number of the digital input to which
you’ve connected your digital component.
The numbers correspond with the numbers beside the
inputs on the back of the receiver.
3
Select the component that corresponds with the
one you connected to that input
Select between
DVD/LD
,
TV/SAT
,
VCR1
,
VCR 2
,
CD
,
CD-R
or
MD
.
• Use the
/
(cursor up/down)
buttons and
ENTER
to do this.
• If you assign a digital input to a certain function (for
example,
DVD/LD
) then any digital inputs previously
assigned to that function will automatically be
switched off.
4
When you're finished, select ‘Exit’.
You will return to the Input Assign menu.
Assigning the component video inputs
• Default settings:
Component-1
–
OFF
Component-2
–
OFF
If you used component video cables to connect your
video equipment you must tell the receiver which device
it is, or else you may see the S-video or composite video
input instead of the component video signal.
1
Select ‘Component -In Select’ from the Input
Assign menu.
2. THX CINEMA Setup
[ PL I I / PL I Ix MOVIE
]
[ PRO LOGIC
]
[
NEO:6 CINEMA
]
[ Exit
]
System Setup
[ 1. Surround Setup
]
[ 2. THX CINEMA Setup ]
[
3. Input Assign
]
[ 4. Function Rename
]
[ 5. Multi Room
]
[ 6 12V Trigger
]
[ Exit
]
3. Input Assign
[
Digital-In Select
]
[Component-In Select ]
[Exit ]
3. Input Assign
[
Digital-In Select
]
[Component-In Select ]
[Exit ]
Digital - In Select
Digital - 1
[ TV/SAT ]
Digital - 2
[
CD-R
]
Digital - 3
[ DVD/LD ]
Digital - 4
[
CD
]
[ Exit ]
Digital - In Select
Digital - 1
[
DVD/LD
]
Digital - 2
[
CD-R
]
Digital - 3
[
OFF
]
Digital - 4
[
CD
]
[ Exit ]
3. Input Assign
[Digital-In Select
]
[
Component-In Select
]
[Exit ]
Component - In Select
Component - 1 [
OFF
]
Component - 2 [
OFF
]
[ Exit ]
VSX-54TX_0430.book 72 ページ ２００４年５月６日 木曜日 午後８時７分
