Controls and displays
04
35
En
Remote control
1
RECEIVER (STANDBY/ON)
Press to switch the receiver on or into standby.
2
MULTI CONTROL buttons
These buttons are the basic controls that switch the
mode of the receiver and the remote control, which
allows you to control your other components.
TV CONT
Press so that the remote control can operate the TV
control commands.
3
Listening mode buttons
(page 37)
MOVIE / MUSIC
Press to select the surround listening mode you want
(see
Listening in surround sound
on page 37).
After selecting a
MOVIE
or
MUSIC
listening mode
above, use these to select the options available.
ENTER
Use to confirm your selection.
STEREO/DIRECT
(page 40)
Switches the receiver into
STEREO
mode if it was in
a different listening mode or toggles between
DIRECT
and
STEREO
.
4
SYSTEM SETUP
Use to display the System Setup menu (page 71). Also
used to display a menu when controlling other
components (such as a DVD player or TV), or as the
TUNER EDIT
button when using the tuner.
5
AUDIO
Use to switch the audio tracks of a DVD when a DVD
player is selected as the input source.
6
Command buttons for other components
Use these buttons to control the component you selected
with the
MULTI CONTROL
buttons. They are available
once you’ve programmed the remote to control the
appropriate component (for example, your TV or DVD
player). See
Controlling other equipment
on page 53 for
7
Number buttons
The operation of these buttons depends on whether the
remote control has been set to the
RECEIVER
or
MULTI
CONTROL
setting (see
Controlling other equipment
on
page 53 for more on this). When
RECEIVER
is selected,
you’ll be able to select the following:
DIMMER
(page 63)
Use to adjust the brightness of the front panel
display.
LOUDNESS
(page 44)
Press to switch Loudness on/off.
TONE
(page 44)
Press to switch the tone controls on or off (bypass).
BASS/TREBLE
(page 44)
Use to select whether the bass or treble will be
adjusted.
+/–
Use to adjust the sound delay, the tone, effect and
channel levels, as well as to change Dolby Pro Logic
II / Dolby Pro Logic IIx Music parameter settings.
EFFECT/CH SEL
Press repeatedly to select a channel, then use
–/+
to
adjust the level
(see
Tip
on page 52). Also selects the
EFFECT
mode, Dolby Pro Logic II / Dolby Pro Logic IIx
Music parameters (see page 39) and the sound delay
setting (see page 62). You can then use the
+
and
–
buttons to make these adjustments.
SIGNAL SEL
(page 41)
Press repeatedly to select one of the following:
• AUTO
If there are analog and digital signals input, the
receiver automatically selects the digital signal.
1
9
10
11
12
13
14
15
16
17
18
19
2
3
4
5
6
7
8
1
VSX-54TX_0430.book 35 ページ ２００４年５月６日 木曜日 午後８時７分
