Using the tuner
06
47
En
Memorizing station presets
If you often listen to a particular radio station, it's
convenient to have the receiver store the frequency for
easy recall whenever you want to listen to that station.
This saves the effort of manually tuning in each time. The
receiver can memorize up to 30 stations, stored in three
banks, or classes, (A, B and C) of 10 stations each. When
memorizing FM frequencies, the receiver also stores the
MPX setting (see
MPX mode
above).
1
Tune to a station you want to memorize.
See
Finding a station
above and
Tuning directly to a
station
above for more details on how to do this.
2
Press TUNER EDIT.
The display shows
MEMORY INPUT
then a blinking
memory class (
A
,
B
or
C
).
3
Press CLASS to select one of the three classes.
Press repeatedly to cycle through the three memory
classes,
A
,
B
and
C
.
4
Use the ST +/– buttons to select the station
preset you want.
On the front panel, press
SELECT
first to switch to the
frequency select mode for (
STATION
)
/–.
• You can also use the front panel
MULTI JOG
dial or
the number buttons on the remote control to select
the station preset.
5
While the display is blinking, press ENTER.
6
Repeat steps 1 – 5 to memorize up to 30 stations.
Listening to memorized station presets
You can do this from both the remote control and the
front panel.
1
Press CLASS to select the class in which the
station is stored.
Press repeatedly to cycle through the three memory
classes,
A
,
B
and
C
.
2
Use the ST +/– buttons to select the station
memory in which the station is stored.
On the front panel, press
SELECT
first to switch to the
frequency select mode for (
STATION
)
/–.
• You can also use the number buttons on the remote
control to recall the station preset.
Naming station presets
You can input a name of up to four characters for each
preset station in the receiver’s memory. For example, you
could input
Jazz
for that station and when you listen to it
the name, rather than the frequency, will appear in the
front panel display.
1
Press CLASS repeatedly to select the class.
Press repeatedly to cycle through the three memory
classes,
A
,
B
and
C
.
2
Use the ST +/– buttons to select an FM or AM
preset station.
On the front panel, press
SELECT
first to switch to the
frequency select mode for (
STATION
)
/–.
3
Press TUNER EDIT to select the station name
mode.
VSX-54TX_0430.book 47 ページ ２００４年５月６日 木曜日 午後８時７分
