Pioneer Elite VSX-54TX Operating Instructions Manual Download Page 55

Page: 55 / 95

Controlling other equipment

Controls for TVs

This remote control can control components after entering the proper codes or teaching the receiver the commands
(see

Using the remote control with other components

on page 53 for more on this). Use the

MULTI CONTROL

buttons

to select the component.

• The

TV CONTROL

buttons on the remote control are dedicated to control the TV assigned to the

TV CONT

button.

Thus if you only have one TV to hook up to this system assign it to the

TV CONT MULTI CONTROL

button. If you

have two TVs, assign the main TV to the

TV CONT

button.

• Depending on the maker and individual model, there are some buttons that may not be able to operate some equip-

ment or may operate it in a different way.

Button(s)

Function

Components

Switches the TV, Satellite TV, or CATV between standby and on.

Cable TV/Satellite TV/TV

INPUT
SELECT

Switches the TV input. (Not possible with all models.)

TV
CHANNEL
+/-

Selects channels.

Cable TV/Satellite TV/TV

TV
VOLUME
+/-

Adjusts the TV volume.

Use to move back channels.

Cable TV/Satellite TV/TV/DTV

Use to move forward channels.

Cable TV/Satellite TV/TV/DTV

Use to choose the BLUE commands on a DTV menu.

Satellite TV/DTV

Use to move back a page in the menu.

Cable TV

Use to choose the YELLOW commands on a DTV menu.

Satellite TV/DTV

Use to move forward a page in the menu.

Cable TV

Use to choose the GREEN commands on a DTV menu.

Satellite TV/DTV

Use to choose the RED commands on a DTV menu.

Satellite TV/DTV

Switches the DTV on or off.

Satellite TV/DTV

GUIDE

Use as the

GUIDE

button for navigating.

Cable TV/Satellite TV/TV/DTV

RETURN

Exits the menu.

Cable TV/Satellite TV/DTV

Number
buttons

Use to select a specific TV channel.

Cable TV/Satellite TV/TV/DTV

ENTER/
DISC

Use to enter a channel.

Cable TV/TV/DTV

MENU

Selects the menu.

Cable TV/Satellite TV/TV/DTV

ENTER

Press to select or adjust and navigate items on the menu screen.

Cable TV/Satellite TV/TV/DTV

VSX-54TX_0430.book 55 ページ２００４年５月６日　木曜日　午後８時７分

Summary of Contents for Elite VSX-54TX































































































Search results

Summary of Contents for Elite VSX-54TX

Reviews:

Related manuals for Elite VSX-54TX

Brands by name

Popular brands

Pioneer Elite VSX-54TX, Operating Instructions Manual

Search results

Summary of Contents for Elite VSX-54TX

Reviews:

Related manuals for Elite VSX-54TX

Brands by name

Popular brands