26
Display
All the display information is explained and/or referenced here.
5 DSP indicator (See p.42 – 44)
Light when a DSP or Advanced Theater mode
is selected.
6 STEREO indicator
Lights when a STEREO mode is selected.
7 Source indicators
3
indicator lights at the selecting source.
8 TAPE 2 indicator
Lights when the TAPE 2 monitor is on.
9 MASTER VOLUME indicator
Displays current volume level.
10 MULTI-ROOM indicator
Lights when the Multi-room system is on.
11 Sound control indicators
DNR –
Lights when the digital NR is on.
LOUDNESS –
Lights when the Loudness is on.
TONE –
Lights when the Tone control is on.
MIDNIGHT –
Lights when the Midnight mode
is on.
12 Tuner indicators
STEREO –
Lights when a FM stereo broadcast
is received in the auto stereo mode.
TUNED –
Lights when a broadcast is received.
MONO –
Lights when the tuner is set to
receive FM broadcasts with the mono mode
selected.
13 H.P. (headphones)
Lights when headphones are connected to the
PHONES jack (speakers systems A and B both
turn off automatically).
14 Character display
Shows current mode, status, etc.
15 Analog level indicators
OVER –
When the source signal is analog, this
lights if the signal is in danger of distorting.
Press INPUT ATT on the remote control to
lower the signal level.
ATT –
Lights when INPUT ATT is used to
reduce the level of the analog source signal.
1 Speaker indicators
Light to indicate the current speaker system, A
and/or B.
2 SIGNAL SELECT indicators
Light to indicate the input signal you selected.
ANALOG
–
Lights when analog signals are
assigned.
DIGITAL
–
Lights when digital audio signals are
selected.
AUTO
–
Lights when the receiver is set to
select the input signal automatically.
3 Program Format indicator
2
DIGITAL –
Lights when a source with
Dolby Digital signals is played.
DTS
–
Lights when a source with DTS audio
signals is played.
For Dolby Digital or DTS sources:
These
indicators change according to which channels
are active in the source. When all three LS (left
surround), S (surround) and RS (right surround)
light at the same time it means a SURROUND
EX source or a DTS ES source with surround
back channels is being used.
L –
Left front channel.
C –
Center channel.
R –
Right front channel.
LS –
Left surround channel.
S –
Surround channel (mono).
RS –
Right surround channel.
LFE –
Low Frequency Effects channel.
4
2
/dts mode indicators (See p.42 – 44)
2
DIGITAL –
Indicates multi channel playback
of a Dolby Digital source.
2
PRO LOGIC –
Lights when Dolby Pro Logic
decoding is switched on.
dts –
When the
2
/dts mode on the receiver is
on, this indicator lights to indicate playback of a
DTS signal.
THX –
Lights when the HOME THX CINEMA
mode is selected.
EX –
Lights when decoding a Surround EX
source.
Displays & Controls
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
