44
Selecting a Sound Mode
To ensure the best possible surround sound, be sure to complete the set up procedures described in “Setting
Up for Surround Sound” (starting on p. 28) before using the sound modes. This is particularly important when
using the
2
(Dolby) Digital or DTS sources. When using the sound modes, using SPEAKERS A will give the
best results. If you use SPEAKERS B the sound will be down mixed to the two front B speakers and the
surround sound effect for the center, surround and/or surround back speakers will be lost.
Basic Playback
1 Put the remote control slide switch
in USE.
2 Select the sound mode.
• For STANDARD
\
Press STANDARD
Each press changes the STANDARD mode as follows:
[When using SURROUND BACK speakers]
STANDARD
STANDARD 7.1
STANDARD AUTO
[When not using SURROUND BACK speakers]
STANDARD only
• For HOME THX CINEMA
\
Press THX (THX CINEMA)
Each press changes the THX mode as follows:
[When using SURROUND BACK speakers]
THX CINEMA
THX SURROUND EX
THX AUTO
[When not using SURROUND BACK speakers]
THX CINEMA only
• For ADVANCED THEATER
\
Press ADVANCED
THEATER (ADVANCED)
Each press changes the ADVANCED THEATER
mode as follows:
[When using SURROUND BACK speakers]
MUSICAL 7.1
DRAMA 7.1
ACTION 7.1
7-D THEATER
[When not using SURROUND BACK speakers]
MUSICAL
DRAMA
ACTION
5-D THEATER
• For DSP modes
\
Press DSP (DSP MODE)
repeatedly
Each press changes the DSP mode as follows:
[When using SURROUND BACK speakers]
HALL 1 7.1
HALL 2 7.1
JAZZ 7.1
7CH STEREO
THEATER 2 7.1
THEATER 1 7.1
DANCE 7.1
[When not using SURROUND BACK speakers]
HALL 1
HALL 2
JAZZ
5CH STEREO
THEATER 2
THEATER 1
DANCE
• For STEREO
\
Press STEREO (STEREO/DIRECT)
Each press changes the STEREO mode as follows:
STEREO
DIRECT
memo
AV PRE-PROGRAMMED AND LEARNING
REMOTE CONTROL UNIT
S0URCE
DVD/LD
TV/SAT
VCR2
CD
TV VOL
TV FUNC
MENU
ENTER
STEREO/
DIRECT
DSP
THX
LIGHT
/DTS
MUTE
TV
VOLUME
VCR 1/
DVR
CD-R/
TAPE 1
TUNER
TV CONT
RECEIVER
USE
SETUP
MULTI
OPERATION
CLASS
DTV ON/OFF DTV MENU
MPX
DIRECT ACCESS
CHANNEL
STATION
TUNING
DISC
+10
EXIT
GUIDE
TV CONTROL
FUNCTION
REMOTE SETUP
SYSTEM SETUP
INPUT
ATT
ADVANCED
MIDNIGHT
MULTI CH
INPUT
STANDARD
DIGITAL
NR
EFFECT/
CH SEL
SIGNAL
SELECT
BAND
SYSTEM
OFF
1
2
3
4
5
6
7
8
9
0
ENTER
Î
¶
8
7
3
1
¡
4
¢
+
-
+
-
+
-
MULTI CONTROL
+
+
–
–
+
–
ENTER
THX
+
STEREO/
DIRECT
STANDARD
ADVANCED
THX
+/
EFFECT/
DSP
CH SEL
1
DSP MODE
STEREO/
DIRECT
STANDARD
THX CINEMA
ADVANCED
• If you have SURROUND BACK speaker(s) switched on (see p.33-34) then 7-D THEATER and 7CH
STEREO will appear as such in the display on the receiver. If these speakers are not switched on the
above two modes will appear as 5-D THEATER and 5CH STEREO.
• The effects of ADVANCED THEATER mode can be adjusted in the range of 10 to 90 by pressing
/– (The default setting is 70). Also, the effect level can be set in each ADVANCED THEATER
mode by pressing the /–) button.
• The amount of effect of each DSP mode can be adjusted in the range of 10 to 90 (the default setting
value is 70) by pressing /–.
• 5/7CH STEREO modes cannot be changed.
