10
Checking the Supplied Accessories
Please check that you have received all of the following supplied accessories.
Preparing the Remote Control
Loading the batteries
Load the batteries into the remote control as shown below. Please use alkaline batteries. When you notice a
decrease in the operating range of the remote control, replace all batteries with new ones.
CAUTION!
Incorrect use of batteries may result in such hazards as leakage and bursting. Observe the following precautions.
• Never use new and old batteries together.
• Insert the plus and minus sides of the batteries properly according to the marks in the battery case.
• Batteries with the same shape may have different voltages. Do not use different batteries together.
• When disposing of used batteries, please comply with governmental regulations or environmental public institution’s
rules that apply in your country / area.
“AA” IEC LR6
batteries x 2
FM wire Antenna
AM loop Antenna
1
2
3
\
\
Remote Control Unit
memo
Before You Start
How to Use This Manual
This manual is for the VSX-35TX Audio/Video Multi-
Channel Receiver.
This manual is divided into three main sections which
will tell you how to setup and use the unit :
PREPARATION
First carry out the tasks below in this “Before You
Start“ section to prepare the remote control, then
connect the receiver to your other components as
described in “Connecting Your Equipment“ (p.12).
Take special care to connect your digital equipment
like DVDs and LDs properly to be able to take
advantage of the receiver’s surround sound systems
(p.13-15). To learn about a specific button, control, or
indicator, see “Displays & Controls“ starting on p.22.
SET UP
Performing the tasks in “Initial Setup“ (from p.27) is
essential to get proper surround sound.
OPERATION
To play some music or soundtrack refer to “Basic
Playback“ on p.41. “Using the Tuner“ (p.54) explains
how to use the radio of this unit. Doing the operations
in “Remote Control of Other Components“ (p.58) is
highly recommended so you can use this unit’s
remote control for all your components. “Using Other
Functions“ (p.69) explain the other possibilities of the
receiver.
“Techno Tidbits & Problem-solving“ (p.86) provide
detailed technical information and a troubleshooting
guide.
The following marks and symbols are used throughout
the manual:
Provides additional information,
precautions, and advice.
Indicates a blinking button, indicator, or
display.
Indicates a steadily lit button, indicator, or
display.
•
Operating Instructions
“AA” IEC LR6
batteries x 2
