53
OPERA
TION
DUAL MONO Setting
The dual mono setting can only be used when listening to Dolby Digital discs that have dual mono software
encoded in them. Dual mono software usually is used to put two different soundtracks on one DVD. With this
setting you can choose which channel in the dual mono setting you want to listen to. Thus, it is useful for
soundtracks that have one language on one channel and a different language on the other. Remember this
setting is only applicable if you are using Dolby Digital software with a dual mono soundtrack and want to isolate
one of the channels therein. Otherwise, just ignore this function.
.
1 Turn the receiver ON.
2 Hold down the RETURN button for 3
or 4 seconds. The receiver will cycle
through the three different dual mono
settings for as long as you hold the
button down.
Take your finger off the button when the mode that
you want to use is displayed.
The different settings are: DUAL ch1, where you only
hear channel 1; DUAL ch2, where you only hear channel
2; and DUAL ch1/ch2, where you hear both channels, but
independently from different speakers.
The display will show dual mono for a while then revert
to the sound mode you are in but you will still be
listening to dual mono.
DUAL ch1 setting
DUAL ch2 setting
DUAL ch1/ch2 setting
Basic Playback
2
1
When DUAL MONO is
playing with ch 1 selected
the L will blink. When
playing with ch 2 selected
the R will blink. When
playing with ch 1/2 selected
the L and R will blink.
memo
The default setting is DUAL ch1.
