Pioneer Elite VSX-35TX, Operating Instructions Manual

Page: 7 / 96

7
Quick Start Guide
5 5
5 5
5
Playing a DVD with Surround Sound
[
[
FREE t
]
]
Sp e a k e r Se t t i n g
THX
[
[
[ ]
Su bwo f o e r
S u r r o u n d
S u r r B a c k
F r o n t LARGE
[ ]
LARGE
[ LARGE ]
x 2
]
NO
]
YES
Ce n t e r
[ ]
EX I T
1 Go through the entire "Initial Setup"
procedures as outlined on p. 27 – 40
of this instruction manual.
If you don't hook up any other conmponents
with digital audio or do so following the default
settings of the receiver (see p. 15) you won't
have to assign any more digital inputs, but
many other adjustments will improve the sound
tremendously.
2 Experiment with the different sound
settings offered with the
2
/DTS
and DSP buttons.
For more information see p. 41 – 45.
3 As mentioned above you should go
through the "speaker setting"
instructions on p. 28 – 40 to set up
your speakers properly. If you don't
do this you, at least, need to make
sure the CENTER channel is turned
off if you don't have a center
speaker. Use the instructions on
p. 33 – 34.
6 6
6 6 6
For Better Surround Sound
1 Turn on the receiver, your TV, and
the DVD player.
2 Set the remote control slide switch
to USE. Press the DVD/LD button
on the remote control.
You should see "DVD/LD" in the display on the
receiver.
3 Press the STANDARD button for the
basic surround sound setting.
4 Play a DVD.
5 Choose the Digital-3 you hooked up
your DVD player to on p. 4 – 5 and
assign "DVD/LD" to it.
1
Use the
5¥∞
buttons to choose the Digital-3
and press ENTER.
[
D i g i t a l - i DVD / LD
DVD / LD
D i g i t a l - i
D i g i t a l - 1
n S e l e c t
]
[
D i g i t a l - i CD D i g i t a l - 2
]
[
D i g i t a l - i D i g i t a l - 3 ]
[
D i g i t a l - i
TV / SAT
D i g i t a l - 4 ]
[ ]
EX I T
2
Use the
5¥∞
buttons to choose the DVD/LD
setting and press ENTER.
[
D i g i t a l - i OF F
D i g i t a l - i
D i g i t a l - 1
n S e l e c t
]
[ DVD / LD ]
[
D i g i t a l - i CD D i g i t a l - 2
]
D i g i t a l - i D i g i t a l - 3
[
D i g i t a l - i
TV / SAT
D i g i t a l - 4 ]
[ ]
EX I T
6 Select EXIT with
5¥∞
buttons and
press ENTER to return to the Assign
Setup menu.
[
[
D i g i t a l - I n Se l e c t
S e l e c t
]
n n e l n I
]
Mu l t i
C omp o
a Ch
[
- I n
]
e n n t
Mu l t i
[
m -
]
Ro o
[ ]
EX I T
7 Select EXIT with
5¥∞
buttons and
press ENTER to return to the
System Setup menu.