Recording
07
80
En
Using the built-in A.TV and D.TV tuners
Switching between A.TV and D.TV tuners
•
Press to switch between D.TV (digital)
and A.TV (analog).
Changing channels
There are a number of ways to select analog and digital
TV channels.
1
Note that you can’t change the TV channel
during playback, recording or during recording standby.
•
C/– buttons
•
Number buttons
For example, to select channel 4 (digital channel
D004), press
4
then
ENTER
; for channel 34 (digital
channel D034), press
3
,
4
,
ENTER
.
2
•
CH +/–
buttons on the front panel.
• For D.TV channels only, you can also use the Channel
List—see below.
Tip
• When changing terrestrial digital broadcast
channels, channels with a low signal strength may
result in a black screen being displayed.
• For other channels, it may take a short while for the
channel picture to appear, and/or for the channel
number to appear.
• In both of the above cases, some improvement may
be possible by adjusting the antenna.
Using the D.TV Channel List
When in D.TV mode, you can call up the on-screen
Channel List anytime by pressing
ENTER
. Use the
/
buttons to select a channel, then press
ENTER
to switch
to that channel.
1
Displaying a channel banner
A channel banner shows program titles, start and end
times of the current program and other channel
information. The information is updated every minute.
•
Press to display the channel banner for the
current channel.
• Use the
/
buttons to display the channel banner
for other channels. To switch to the displayed
banner’s channel, press
ENTER
.
• The channel banner displays the Subtitles (
) and
MHEG (
) icon if that channel supports the MHEG
application (see
Using the MHEG application
below).
3
• To see more detailed channel information, press
INFO
again.
4
Use the
/
buttons to display information about
previous and following programs. Use the
/
buttons to see information about other channels.
• If there is still more information to be displayed,
More ...
is displayed; press the
BLUE
button to see
the extra information.
• To hide the channel banner, press
RETURN/EXIT
.
Changing D.TV audio languages
•
Press to display the current audio
language. Press repeatedly to change it to other
available languages.
Changing D.TV subtitle languages
•
Press to display the current subtitle
language. Press repeatedly to change it to other
available languages.
Note
1 • If you select a locked channel, you will need to enter your password to access it.
• While listening to D.TV radio channels, the screen saver automatically starts after no button has been pressed for 3 minutes.
2 Analog channel presets are numbered 1 to 99; digital channel presets are numbered D001 to D999.
+
A.TV/D.TV
MAIN
SUB
– C
SET UP
MCACC
ADVANCED
TEST TONE
SR
+
/TUNE
+
ENTER
/TUNE
–
/ST
–
/ST
+
1
2
3
4
5
6
7
8
0
9
D001
D002
D003
D004
************
************
******
************
D005
D006
****
******
3 Due to inaccurate information provided by the broadcaster, some icons may occasionally be present or absent in error.
4 Not all channels supply more detailed information.
INFO
Wed.30.Apr 12:46
Now
D001 ************
Next
********************
*************
12:00
12:30
11:30
12:00
-
-
Now
************************
More...
12:00
11:30 -
+
AUDIO
MAIN
SUB
+
MAIN
SUB
SUBTITLE
Summary of Contents for DVR-545HX-S
Page 18: ...18 En SX SW505HX S ST606 ...
