Other connections
06
31
En
For an external FM antenna, use a PAL connector to hook
up an external FM antenna.
Using this unit with a Pioneer plasma
display
If you have a Pioneer plasma display
1
, you can use an
SR+ cable
2
to connect it to this unit and take advantage
of various convenient features, such as controlling this
unit via the plasma display’s remote sensor, automatic
video input switching of the plasma display, display unit
messages appearing on the plasma display screen, and
automatic volume muting on the plasma display.
Important
• With an SR+ cable connected, the remote must now
be pointed towards your plasma display rather than
the display unit of the receiver subwoofer in order to
control the receiver subwoofer.
•
Use a 3-ringed miniplug SR+ cable to connect the
CONTROL IN jack of this unit (through a media
receiver, if applicable) to the CONTROL OUT jack of
your plasma display.
3
Before you can use the extra SR+ features, you need to
make a few settings in the unit—see
SR+ Setup for
Pioneer plasma displays
below.
SR+ Setup for Pioneer plasma displays
Make the following settings if you have connected a
Pioneer plasma display to this unit using an SR+ cable.
1
Press SR+.
2
Use the
/
buttons to choose SETUP, then
press ENTER.
3
Use the
/
buttons to choose the setting you
want to adjust.
The current setting is shown for each option as you cycle
through the display. See below for a full list and
description of each.
4
Use the
/
buttons to adjust the setting.
5
Repeat steps 3 and 4 to make other settings.
6
When you’re done, press ENTER to leave the SR+
setup menu.
Note
1 This system is compatible with all Pioneer plasma displays from 2003 onward.
2 The 3-ringed SR+ cable from Pioneer is commercially available under the part number ADE7095. Contact the Pioneer Customer Support di-
vision for more information on obtaining an SR+ cable.
ANTENNA
PAL connector
SYSTEM CONNECTOR
SPEAKERS
DVD/DVR 2
(OPTICAL)
SUB WOOFER
AC IN
CENTER
SURROUND
DVD/DVR 1
(COAXIAL)
DIGITAL
AUDIO INPUT
ANTENNA
FM
UNBAL
AM
LOOP ANTENNA
75
Ω
ANALOG
DIGITAL
(OPTICAL)
R
L
R
L
FRONT
R
L
CONTROL
OUT
CONTROL IN
MCACC
SETUP MIC
USE ONLY WITH
DISPLAY UNIT
OUT
CONTROL
Pioneer plasma display
Media receiver
3 You won’t be able to use the remote sensor of this unit with the
CONTROL IN
jack of this unit connected to the
CONTROL OUT
jack of your
plasma display. You can use the remote sensor of the plasma display (even in standby) as long as the power isn’t switched off.
SET UP
MCACC
SURROUND ADVANCED
SOUND
TV/DVD
SLEEP
INPUT
MAIN
SUB
CHANNEL
RDS DISP
AXD7442
VOLUME
DISPLAY
CLEAR
JUKE BOX
TEST TONE VIDEO IN
SR
+
ONE TOUCH COPY
MENU
ENTER
/ /
TIMER REC REC MODE
1
2
3
4
5
6
7
8
0
+
+
–
–
9
Summary of Contents for DVR-545HX-S
Page 18: ...18 En SX SW505HX S ST606 ...
