Connecting up
02
18
En
Connecting an external decoder box (2)
If you only have a decoder, connect it to this recorder and your TV as shown on this page.
Using the setup on this page you can:
• Record scrambled channels received using the recorder’s built-in TV tuner.
Important
• Do not connect this recorder ‘through’ your VCR, satellite receiver or cable box. Always connect each component
directly to your TV or AV receiver.
1
Connect RF antenna cables as shown.
This enables you to watch and record TV channels.
2
Use a SCART cable (not supplied) to connect the
AV1(RGB)-TV AV connector to a SCART AV connector
on your TV.
This enables you to watch discs.
3
Use another SCART cable to connect the AV2/
(INPUT 1/DECODER) AV connector to a SCART AV
connector on your decoder box.
This enables you to record scrambled TV channels.
Note
• In order to use this setup, you will need to make the
following settings from the Initial Setup menu:
– Set the
AV2/L1 In
setting to
Decoder
from the
Initial Setup menu (see
AV2/L1 In
on page 100).
– From the
Manual CH Setting
screen, set the
Decoder
setting for the scrambled channels to
On
(see
Manual CH Setting
on page 98).
TV
DIGITAL
OUT
AC IN
OPTICAL
CONTROL
IN
R
L
AUDIO
INPUT 1/
AUTO REC
VIDEO
S-VIDEO
R
L
AUDIO
OUTPUT
VIDEO
S-VIDEO
VHF/UHF
IN
OUT
AV 2/INPUT 1
AV 1(RGB)-TV
Antenna/cable TV
wall outlet
Decoder
SCART AV
CONNECTOR
SCART AV
CONNECTOR
ANTENNA
IN
1
2
3
1
02 Connecting _Up_EU.fm 18 ページ ２００３年９月１７日 水曜日 午後９時４１分
