42
<DRB1350>
En/Fr
EFFECT FUNCTIONS
42
<DRB1350>
En
No.
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Name
FADER ROLL (*2)
FADER MULTI TAP
DELAY (*1)
FADER TRANS PAN
FADER PITCH SHIFTER
FADER RING
FADER VOCODER1
FADER VOCODER2
FADER FILTER (LPF)
FADER FILTER (HPF)
FADER FILTER (BPF)
FADER FLANGER
FADER PHASER
FADER SYNTHE1
FADER SYNTHE2
FADER SYNTHE3
Parameter 1 (TIME/SELECT dial)
Explanation
Set reference
ROLL time
Set reference
effect time
Set reference
effect time.
Set type of pitch
change.
Change
fundamental
frequency of
effect sound.
Set sensitivity
corresponding to
input volume
—
—
—
—
—
Base frequency
Base frequency
Base frequency
Setting range (unit)
40 – 10000 (msec)
8 – 1200 (msec)
40 – 2000 (msec)
1 – 3
500 – 8000 (Hz)
1 – 100 (%)
—
—
—
—
—
40 – 23999 (Hz)
40 – 23899 (Hz)
40 – 23899 (Hz)
Parameter 2 (MIX/DEPTH dial)
Explanation
Set balance between source and
ROLL sounds.
Set balance between source and
delay sounds.
Set balance between source and
effect sounds.
Set balance between source and
pitch-shifted sounds.
Change effect sound level.
Adjust volume of code selected on
panel menu.
Rotate to right for increased
resonance and more unusual
sound.
Rotate to right for increased
resonance and more unusual
sound.
Rotate to right for increased
resonance and more unusual
sound.
Rotate to right for increased effect.
Rotate to right for increased effect.
Left half changes volume, right half
changes volume of the set frequency.
Left half changes volume, right half
changes volume of neighboring
frequency.
Left half changes volume, right half
changes volume of neighboring
frequency.
Fader lever
Explanation
Change roll time
Change reference
beat time.
Change cut time
Change pitch of
input sound.
Change frequency
of effect sound
Change fundamental
frequency of
oscillating sound.
Changes cutoff
frequency of low-
pass filter.
Changes cutoff
frequency of high-
pass filter.
Changes band-pass
filter’s center
frequency.
Changes frequency
band subject to
flange effect.
Changes frequency
band subject to
phase effect.
Changes to stair-
stepped sound.
Changes to stair-
stepped sound.
Changes to stair-
stepped sound.
7
Fader effects
(*1) When the channel fader or cross fader is used to lowering sound volume, no effect sounds will be heard, even if monitor
SELECT switch is set to the [EFFECT] position.
(*2) When EFFECT switch is turned OFF, no effect sounds will be heard even if the monitor SELECT switch is set to the [EFFECT]
position.
Summary of Contents for DJM 909 - Battle Mixer W/Effects
Page 139: ...139 DRB1350 ...
