Pioneer AVIC-F70BT, Operation Manual

Page: 42 / 216

Black plate (42,1)
Searching for a location by
the coordinates
Entering a latitude and longitude pinpoints
the location.
1 Press the MAP button.
The Map screen appears.
2 Touch the following key.
Displays the navigation menu on
the Map screen.
3 Touch [New Route].
The
“
New Route to...
”
screen appears.
4 Touch to show the next page.
5 Touch [Coordinates].
The
“
Coordinates
”
screen appears.
6 Enter the latitude value and touch
[OK].
p
When a value is already entered in the text
field, touch
or to delete the value
first.
p
You can change the display format of the la-
titude and longitude to any of the following
formats: decimal degrees; degrees and dec-
imal minutes; or degrees, minutes and deci-
mal seconds.
#
When entering the coordinates in UTM for-
mat, touch , then [ UTM Coordinates ].
7 Enter the longitude value and touch
[Go!].
p
When a value is already entered in the text
field, touch
or to delete the value
first.
The searched location appears on the Map
screen.
8 Touch [Select as Destination] on the
“
Map Location
”
screen.
=
For details on the operations in the
“
Map
Location
”
screen, refer to Using the
“
Map
Location
”
screen on page 43.
After touching [
Select as Destination
], the
“
Route Summary
”
screen appears and count-
down begins. When the countdown ends, the
guidance automatically starts. If the screen is
touched anywhere during the countdown, the
countdown stops and the screen will stay as it
is.
=
For details on the operations in the
“
Route
Summary
”
screen, refer to Checking route
information and preferences on page 46.
9 Touch [Start Navigation].
Your navigation system starts the route gui-
dance.
=
For details of the route guidance, refer to
Understanding the route guidance on page
32.
Searching for a location by
scrolling the map
Specifying a location after scrolling the map
enables you to set the position as a destina-
tion or waypoint.
1 Press the MAP button.
The Map screen appears.
2 Touch and drag the screen to scroll the
map to the position you want.
3 Touch the location that you want to se-
lect as your destination.
The cursor appears.
4 Touch [Select as Destination].
After touching [
Select as Destination
], the
“
Route Summary
”
screen appears and count-
down begins. When the countdown ends, the
guidance automatically starts. If the screen is
touched anywhere during the countdown, the
countdown stops and the screen will stay as it
is.
=
For details on the operations in the
“
Route
Summary
”
screen, refer to Checking route
information and preferences on page 46.
<CRB4523-A>42
Engb
42
Chapter
05
Searching for a destination