Black plate (60,1)
—
Manoeuvre restrictions and directional
constraints are taken into account when
planning a route.
—
Only roads that allow lorry access are in-
cluded.
—
Private roads, resident-only roads and
walkways are excluded from routes.
—
U-turns are not used in routes (turning
around on a divided road is not consid-
ered a U-turn for the purpose of this sys-
tem).
p
To edit the name and estimated maximum
speed of the selected vehicle profile, touch
.
p
To add a new vehicle profile, touch [
Add
Profile
]. Then select one of the vehicle
types and set the name and estimated max-
imum speed.
Route Planning Method
You can change the route planning method.
Route calculation can be optimised for differ-
ent situations and vehicle types by changing
the planning method. The route planning
method types are as follows.
!
Fast
Calculates a route with the shortest travel
time to your destination as a priority. Usual-
ly the best selection for fast and standard
cars.
!
Easy
Results in a route with fewer turns and no
difficult manoeuvres. With this option, you
can make this system to take, for example,
the motorway instead of a series of smaller
roads or streets.
!
Short
Calculates a route with the shortest dis-
tance to your destination as a priority.
Usually practical for slower vehicles. Rarely
practical to use to search for shorter routes
for normal vehicles regardless of the
speed.
!
Economical
Calculates a route that is quick and saves
fuel.
Navigation Mode
You can enable or disable off-road navigation.
!
On-road
The route is planned towards the destina-
tion along the roads on the map.
!
Off-road
The route is planned towards the destina-
tion in a straight line, not along the roads
on the map.
Motorways
When this function is turned off, the route is
calculated prioritising the avoidance of motor-
ways.
This function is useful when you want to avoid
motorways when you are driving a slow car or
you are towing another vehicle.
Period Charge
When this function is turned off, the route is
calculated prioritising the avoidance of toll
roads.
This function is useful when you want to avoid
toll roads with restricted time access that re-
quire you to purchase a separate pass or vign-
ette to extend the length of time allotted for
use.
p
This option can be enabled or disabled se-
parately from the pre-use toll road usage
option.
Per-use Toll
When this function is turned off, the route is
calculated prioritising the avoidance of per-
use charged toll roads.
This function is useful when you want to avoid
toll roads where there is a per-use charge.
Ferries
When this function is turned off, the route is
calculated prioritising the avoidance of ferries.
Car Shuttle Trains
When this function is turned off, the route is
calculated prioritizing the avoidance of car
shuttle trains.
<CRB4523-A>60
Engb
60
Chapter
09
Customising preferences of the navigation
