49
3 Connect your iPod.
The song information is transferred to your iPod.
p
When your iPod is already connected, the song information
will be transferred directly to your iPod every time you touch
the song information.
p
When the song information transfer is completed, the infor-
mation stored in this product will be automatically deleted.
p
If you turn off this product or disconnect the iPod while
transferring song information, the transfer may not success-
fully complete.
p
While this product is storing song information, transfer to an
iPod is not possible.
Setting the “Sound Retriever”
function
The “
Sound Retriever
” function automatically enhances com-
pressed audio and restores rich sound.
1 Touch
to switch the settings.
(Mode1) (default),
(Mode2): Activates the
“
Sound Retriever
” function.
(Off): Deactivates the “
Sound Retriever
” function.
p
Mode2 has a stronger effect than Mode1.
Changing the wide screen
mode
You can set the screen size for the video and JPEG images.
p
The default setting is “
Full
”, and for JPEG images is
“
Normal
”.
p
JPEG can be set to either “
Normal
” or “
Trimming
” in wide
screen mode.
1 Touch the screen display mode key.
p
The appearance of this key changes according to the current
setting.
2 Touch the desired mode.
Full
:
A 4:3 picture is enlarged in the horizontal direction only,
enabling you to enjoy an image without any omissions.
Zoom
:
A 4:3 picture is enlarged in the same proportion both verti-
cally and horizontally.
Normal
:
A 4:3 picture is displayed normally, without changing its
proportion.
Trimming
An image is displayed across the entire screen with the
horizontal-to-vertical ratio left as is. If the screen ratio differs
from the image, the image may be displayed partly cut off
either at the top/bottom or sides.
p
This setting is for JPEG images only.
p
You cannot operate this function while driving.
p
Different settings can be stored for each video source.
p
When a video is viewed in a wide screen mode that does not
match its original aspect ratio, it may appear different.
p
The video image will appear coarser when viewed in “
Zoom
”
mode.
Restoring this product to the
default settings
You can restore settings or recorded content to the default set-
tings. Various methods are used to clear user data.
Method 1: Remove the vehicle battery
Resets various settings registered to this product.
p
The settings configured on the “
Theme
” screen are not
reset.
Method 2: Restore the default settings from the
“System” menu
Method 3: Press the RESET button
Refer to
Resetting the microprocessor
on page 6
Restoring the default settings
p
This setting is available only when you stop your vehicle in a
safe place and apply the parking brake.
CAUTION
Do not turn off the engine while restoring the settings.
1 Display the “
System
” setting screen.
2 Touch [
Restore Settings
].
A message confirming whether to initialize the settings appears.
3 Touch [
Restore
].
p
The source is turned off and the Bluetooth connection is
disconnected before the process starts.
Other functions
< QRD3482-A >
Common operations
Other functions
