Pioneer AVH-4100NEX, Owner'S Manual

Page: 11 / 296

< CRD4847-A >
English
02
Chapter
11
En
4 Press the button.
The LCD panel closes.
Ejecting an SD memory card
1 Press the button.
2 Touch the following key.
Opens the LCD panel.
3 Press the middle of the SD mem-
ory card gently until it clicks.
The SD memory card is ejected.
4 Pull the SD memory card out
straight.
5 Press the button.
The LCD panel closes.
■
Connecting and disconnecting
an iPod
Connecting your iPod
For details, refer to Connecting an iPhone
with Lightning connector on page 76.
For details, refer to Connecting an iPhone
with 30-pin connector on page 76.
Disconnecting your iPod
Pull out the cables after confirming
that no data is being accessed.
■
Plugging and unplugging a USB
storage device
p
This product may not achieve optimum
performance with some USB storage
devices.
p
Connection via a USB hub is not possible.
p
A USB cable is required for connection.
Plugging in a USB storage device
Plug a USB storage device into the
USB cable.
2
1
1
USB cable
2 USB storage device
Unplugging a USB storage device
Pull out the USB storage device
after checking that no data is being
accessed.
Startup and termination
1 Start the engine to boot up the
system.
After a short pause, the splash screen
comes on for a few seconds.
2 Turn off the vehicle engine to ter-
minate the system.
This product is also turned off.
On first-time startup
When you use this product for the first time,
select the language that you want to use.
1 Start the engine to boot up the
system.
After a short pause, the splash screen
comes on for a few seconds.
The “ Select Program Language ” screen
appears.
2 Touch the language that you want
to use on screen.
3 Touch the following key.
Displays the “ Smartphone
Setup ” screen.
4 Touch the item you want to set.
For details, refer to Information on the
connections and functions for each
device on page 21.
5 Touch the following key.
Displays the Top menu
screen.
If you touch , the display returns to the
previous screen.
Regular startup
Start the engine to boot up the
system.
After a short pause, the splash screen
comes on for a few seconds.
p
The screen shown will differ depending
on the previous conditions.
p
Enter the password for the anti-theft func-
tion if the password entry screen appears.
Turning off the display
You can turn off the display at night or when
the screen is too bright.
■
When the Application screen is
available
Press and hold the MODE button.
The display turns off.
p
If you touch the screen when the display
is off, it reverts to the original screen.
■
When the Application screen is
not available
Press the MODE button.
The display turns off.
p
If you touch the screen when the display
is off, it reverts to the original screen.