JACKIE L
USER’S GUIDE
Edition 24. January 2022
15 / 28
Ev.n. 2-20220124-rev.10
PINNIUM
s.r.o., Za Pazdernou 2573, 397 01 Písek
CIN: 109 01 442 EU VAT No.: CZ10901442
The lifting procedure is shown in the figures below:
1.
Place the lifting Tool on a floor and
insert the rising joist 100x60mm
through the two flaps of the Tool up to
the touch with the floor.
2.
Put the lifting Tool, together with the rising joist
inserted inside, on the heel. Do not fix the heel to the
floor yet. Check, whether the rising joist rests directly
on the heel.
(TIP: Now you can pump the Tool by
your hand a few times to stiffen the Tool between
the heel and the wall.)
3.
Put the main rod on the Tool and fix
it by turning the rod clockwise.
(In the direction of an arrow
–
Fig. 10)
2.
3.
Figure 10
1.
Figure 8
Figure 9
HEEL
