JACKIE L
USER’S GUIDE
Edition 24. January 2022
23 / 28
Ev.n. 2-20220124-rev.10
PINNIUM
s.r.o., Za Pazdernou 2573, 397 01 Písek
CIN: 109 01 442 EU VAT No.: CZ10901442
6.3
SAFETY CONDITIONS
–
DURING OPERATING
Ensure yourself during operating the Tool especially about:
-
Never work under the influence of alcohol or drugs alone or with anyone who exhibits
such behavior.
-
Keep a stable posture during work.
-
Do not operate the Lifting Tool in limited or poor visibility or otherwise unsuitable
conditions.
-
Keep the workplace clean. Clutter in the workplace can cause an accident.
-
Never put your hands or feet in the working area of the Lifting Tool.
-
Never leave the Lifting Tool unattended when it is loaded.
-
When operating the Lifting Tool, use a personal protective equipment required by work
safety on the construction site, such as goggles, hearing protection, helmets, safety
shoes, etc.
-
Never perform maintenance while the Tool is in use.
-
Do not overload the Tool or any accessories.
-
If you notice any unusual operation during work or hear unusual noises from the Tool
or the lifted load, notify your surroundings immediately and leave the workplace.
-
When using two or more Lifting Tools, each one must be operated by its own operator.
6.4
SAFETY CONDITIONS
–
AFTER OPERATING
Ensure yourself after every operating the Tool especially about:
-
Check the Tool for any damage.
-
Keep the Tool clean, prepare it for further use, ie perform maintenance according
to Chapter 7.
-
Store the Tool in a dry and safe place where it will be protected from dirt or mechanical
damage.
7 TOOL MAINTENANCE
After every usage clean thoroughly moving parts and its bearings. Remove the dirt such
as clay, sand and sawdust from the Tool with a cloth or compressed air. Always wear safety
goggles when using compressed air.
