Pinnacle Technology PP7X Series Operation Manual Download Page 37

Page: 37 / 76

11.3

Software Description

In the disk, you can find the software ‘PP7_en.exe’ in the file folder

‘

PC-SW

’

, double click to open it.

Here, you can use the software to update program and download data.
Connect PP7X to PC.

Note:

①

The available baud rate for this printer is 9600, 19200, 38400, 115200, 460800.

②

The printer program can be updated at any baud rate.

③

‘Download Data’, means download font. Please set the parameter in the left column if choose this item.

Press ‘F6’ on the keyboard, and then choose the file in the FONT file folder.

④

‘Download Parameter’, means download parameter. After set the parameter, press ‘F7’ on the

keyboard, and then choose the file in the Parameter file folder.

⑤

The baud rate (9600,19200,38400,115200) and the print density can be changed via Dip Switch, please

refer to Chapter 13 for detail.

Update program

Download font

Download parameter

Choose RS232

Choose the correct port and
baud rate

Summary of Contents for PP7X Series













































































Search results

Summary of Contents for PP7X Series

Reviews:

Brands by name

Popular brands

Pinnacle Technology PP7X Series, Operation Manual

Search results

Summary of Contents for PP7X Series

Reviews:

Brands by name

Popular brands