Operating Manual: PMImicro diag
6-30
Commissioning
9. Press <ENTER>. Your selection is saved.
A prompt appears, asking if you wish to restart the PMImicro diag.
10. Using the navigation keys, select
YES
.
11. Press <ENTER>.
12. The PMImicro diag is restarted.
INFORMATION
If you use the navigation keys to select
NO
under step 10, the unit will not
be restarted.
You will need to restart the PMImicro diag later in order to activate the
interface selection.
Max. number of entries in the event list
Set the max. number of entries in the event list.
Proceed as follows:
1. Hold the <ESC> key down for three seconds.
This will access the main menu.
2. Using the navigation keys, select
Configuration
.
3. Press <ENTER>.
4. Using the navigation keys, select
Event list
.
5. Press <ENTER>.
6. Press <ENTER> again; the first digit will flash.
7. Replace digits:
Use the navigation keys
to select the digit.
Use the navigation keys
to select the new digit value.
Fig. 6-14: Display mode
