6-37
Operating Manual: PMImicro diag
21. Using the navigation keys, set the required identifier.
22. Press <ENTER>.
23. Using the navigation keys, select
Start
.
24. Press <ENTER>.
25. A window appears with a prompt, asking if you wish to perform
the action.
26. Using the navigation keys, select
Yes/No
and then confirm your
selection by pressing <ENTER>.
YES:
The entries are exported.
No:
The entries are not exported.
27. Press <ENTER> to confirm the message.
28. Press <ESC> to exit the menu.
Diagnostic log file
This is where the diagnostics are recorded, i.e. details of which event
message has been added/deleted and when.
INFORMATION
The diagnostic log file contains the event messages plus a description of
the event.
INFORMATION
When performing diagnostics on the PNOZmulti a location description is
also displayed. The location description is created by the user himself and
is entered in the PNOZmulti Configurator.
Proceed as follows:
1. Hold the <ESC> key down for three seconds. This will access the main
menu.
2. Using the navigation keys, select
Log files
.
3. Press <ENTER>.
4. The selection window for
PMImicro diag
is pre-selected.
5. Press <ENTER> and the selection window turns black.
6. Using the navigation keys, select the
Diagnostic
log file.
7. Press <ENTER>.
8. Using the navigation keys, select the required action:
