Operating Manual: PMImicro diag
6-16
Commissioning
11. Press <ENTER>.
12. The PMImicro diag is restarted.
INFORMATION
If you use the navigation keys to select
NO
under step 10, the unit will not
be restarted.
You will need to restart the PMImicro diag later in order to activate the
selection of the connected device.
PC interface
Proceed as follows:
1. Hold the <ESC> key down for three seconds. This will access
the main menu.
2. Using the navigation keys, select
Configuration
.
3. Press <ENTER>.
4. Using the navigation keys, select
Interfaces
.
5. Press <ENTER>.
6. Using the navigation keys, select
PC interface
.
7. Press <ENTER> and the selection window turns black.
8. Using the navigation keys, select the required interface for PC
communication.
9. Press <ENTER>. Your selection is saved.
A prompt appears, asking if you wish to restart the PMImicro diag.
10. Using the navigation keys, select
YES
.
11. Press <ENTER>.
12. The PMImicro diag is restarted.
INFORMATION
If you use the navigation keys to select
NO
under step 10, the unit will not
be restarted.
You will need to restart the PMImicro diag later in order to activate the
interface selection.
