manualshive.com logo in svg

Pilz PMI m107 diag, Operating Manual

Share
Download
Pilz PMI m107 diag Operating Manual Download Page 32

Operating Manual: PMImicro diag

6-2

Commissioning

INFORMATION

If an error should occur while preparing for operation, a window will

appear, showing an appropriate message.

Default setting

The procedure for commissioning the PMImicro diag is “plug and play”.

The unit is supplied with the following default settings:

 • PMImicro configuration

• User setting:

User name, password and access rights are

specified but may be amended (see page 6-7).

Factory default setting: No password protection is activated.

• Menu languages:

German, English; factory default setting: English

• Interfaces:

Factory default setting: COM1(RS 232) -> Connected device, COM2

(RS 485) -> PC;

Connected device: PNOZmulti

• Device diagnostic configuration

The device diagnostic configuration supports the following default projects

on the PMImicro diag (factory default setting: PSS/Safety BUS p)

• PSS/Safety BUS p:

  Diagnostics for all system errors in two languages (German, English).

• PNOZmulti:

  Diagnostics for all system errors in two languages (German, English).

INFORMATION

The language selected for the diagnostic language depends on the

diagnostic configuration on the PMImicro diag.

If a diagnostic configuration is created in the system software of the

connected device and then downloaded to the PMImicro diag, the existing

languages are replaced.

Summary of Contents for PMI m107 diag




































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands