45
SSM-ICON
Use, maintenance and warning manual
Static SmaRt mEtER
|
tRaNSPORt aND HaNDLiNG
|
REV. B
EN
6 - TRANSPORT AND HANDLING
6.1 - SPECIFIC WARNINGS FOR TRANSPORT AND HANDLING
NOTICE!
Transport and handling must be carried out in compliance with the regulations in force in the country of
installation by personnel who are:
•
qualified (specially trained);
• familiar with accident prevention and workplace safety regulations;
• authorised to use lifting equipment.
Transport and handling
Operator qualification
• installer.
PPE required
WARNING!
The PPE listed in this table is related to the risk associated with the equipment.
For the PPE required to protect against risks associated with the workplace,
installation or operating conditions, please refer to:
• the regulations in force in the country of installation;
• any information provided by the Safety Manager at the installation facility.
Weights and
dimensions
of the equipment
For dimensions and weights, refer to paragraph 6.2 "Physical characteristics of the equip-
ment".
Tab. 6.37.
6.1.1 - PACKAGING AND FASTENERS USED FOR TRANSPORT
the transport packaging is designed and manufactured to avoid damage during normal transport, storage and handling.
the equipment must be kept in the packaging until installation.
Upon receiving the equipment:
• make sure that no part has been damaged during transport and/or handling;
• immediately report any damage found to PiEtRO FiORENtiNi S.p.a..
NOTICE!
PIETRO FIORENTINI S.p.A. shall not be liable for any damage to people or property caused by accidents
due to failure to comply with the instructions provided in this manual.
tab. 6.38. describes the types of packaging used:
Ref.
Type of packaging
Image
A
Single cardboard box
Tab. 6.38.
