42
SSM-ICON
EN
Use, maintenance and warning manual
Static SmaRt mEtER
|
USER iNtERFacE
|
REV. B
5.3.5 - CHAPTER 3 (SERVICE)
tab. 5.32. indicates the explanatory table of the sequence in which the pages of the chapter are displayed:
Sequence
Explanatory
field
Numerical field
Description
1
Sd
0, 1, 3
Status of the device.
NOTICE!
The maintenance and/or configured status
is highlighted by the dedicated icon.
2
t
3 digits, 2 integers, 1 decimal
(E.g.: 15.0 °c)
current gas temperature in °c (in °c with 1 decimal
place).
3
EV
dd-mm-yy
Date of the first event in the metrological log.
4
Rc
rS
“count Resolution” menu.
NOTICE!
By selecting the “H” value (High resolution),
the resolution with 4 in 4 decimal
digits is activated for the totalisers T and
TA; following the activation of the "High
resolution" mode, the display shows the
message "High".
If the operator makes no other selection,
the resolution goes back automatically to
the default value (5 in 3 decimals)
at 00:00 the next day.
Selecting the value “L” (Low resolution),
indicates the resolution in the configuration
of 5 in 3 decimals.
5
cd
diSPLaY
“Display contrast” menu.
NOTICE!
On the "diSPLaY" page, a short activation
of the "Enter" key activates the relevant
sub-menu, with the presentation of the
contrast level ("X") corresponding to the
brightness of the display in progress. The
value of "X" is between 1 and 5 (5 indicates
the highest contrast).
The brightness can be changed by pressing
the navigation keys.
You exit the sub-menu and go back to the
previous page by pressing the “Enter” key
(short press).
Tab. 5.32.
