manualshive.com logo in svg

PIETRO FIORENTINI SSM-ICON, Manual

Share
Download
PIETRO FIORENTINI SSM-ICON Manual Download Page 15

15 

SSM-ICON

Use, maintenance and warning manual

Static SmaRt mEtER 

|

 GENERaL iNFORmatiON 

|

 REV. B

EN

2.7 -  SYMBOLS USED IN THE MANUAL

Symbol

Definition

Symbol used to identify important warnings for the safety of the operator and/or equipment.

Symbol used to identify information of particular importance in the manual.
the information may also concern the safety of the personnel involved in using the equipment.

Obligation to consult the instruction manual/booklet.
Refers to a requirement for personnel to refer to (and understand) the operating and warning 
instructions of the machine before working with or on it.

Tab. 2.6.

 HAZARD!

Alerts to a hazard with a high level of risk, an imminent hazardous situation which, if not prevented, will 
result in death or severe damage.

 WARNING!

Alerts to a hazard with a medium level of risk, a potentially hazardous situation which, if not prevented, 
may result in death or severe damage.

 ATTENTION!

Alerts to a hazard with a low level of risk, a potentially hazardous situation which, if not prevented, could 
result in minor or moderate damage.

 NOTICE!

Alerts to specific warnings, directions or notes of particular concern, that are not related to physical injury, 
as well as practices for which physical injury is not likely to occur.

Summary of Contents for SSM-ICON











































































Reviews:

No comments

Brands by name

Popular brands

Load more brands