PIAGGIO Beverly 500 i.e., Workshop Manual

Page: 202 / 382

10 - There occur trend variations
YES go to 11 NO go to 13
11 - Repeat the test clamping the pipe of the spe-
cial tool in the portion between the branch and the
injector.
Check whether the pressure decreases with the
same trend as the system when free. Pressure
decreases much more slowly
YES go to 12 NO go to 13
Specific tooling
020480Y Petrol pressure check kit
12 - Check and replace the injector, if required,
due to an insufficient seal.
(see "THERMAL GROUP AND TIMING SYSTEM
")
13 - There are no trend variations
Repeat the test clamping the pipe of the special
tool in the portion between the branch and the
pump. Check whether pressure decreases much
more slowly.
YES go to 14 NO go to 15
Specific tooling
020480Y Petrol pressure check kit
14 - The pump unidirectional valve is faulty. Replace the pump. (see Pump bracket overhaul)
15 - Check the pipe and the injector union seals more carefully.
Check the component seals again, if necessary.
A POOR SYSTEM SEAL ONLY AFFECTS THE START-UP VELOCITY.
16 - Disconnect the pump connector, start the en-
gine, wait until it stops and connect the connector
again.
Disconnect the fuel return pipe from the pump sup-
port (left pipe).
AHEAD go to 17
Injection
Beverly 500 i.e.
INJEC - 202