PCM-061/phyCORE-i.MX7 System on Module
L-821e_2
© PHYTEC America L.L.C. 2017
10
Declaration of Electro Magnetic Conformity of the PHYTEC
phyCORE-i.MX7 System On Module
PHYTEC System on Modules (SOMs) are designed for installation in electrical appliances or, combined with the PHYTEC
Carrier Board, can be used as dedicated Evaluation Boards (for use as a test and prototype platform for hardware/software
development) in laboratory environments.
CAUTION:
PHYTEC products lacking protective enclosures are subject to damage by ESD and, hence, may only be unpacked,
handled or operated in environments in which sufficient precautionary measures have been taken in respect to ESD-
dangers. It is also necessary that only appropriately trained personnel (such as electricians, technicians and engineers)
handle and/or operate these products. Moreover, PHYTEC products should not be operated without protection circuitry
if connections to the product's pin header rows are longer than 3m.
PHYTEC products fulfill the norms of the European Union's Directive for Electro Magnetic Conformity only in accordance
to the descriptions and rules of usage indicated in this hardware manual (particularly in respect to the pin header row
connectors, power connector and serial interface to a host-PC).
NOTE:
Implementation of PHYTEC products into target devices, as well as user modifications and extensions of PHYTEC
products, is subject to renewed establishment of conformity to, and certification of, Electro Magnetic Directives. Users
should ensure conformance following any modifications to the products as well as implementation of the products into
target systems.
The phyCORE-i.MX7 is one of a series of PHYTEC System on Modules that can be populated with different controllers and,
hence, offers various functions and configurations. PHYTEC supports a variety of 8-/16- and 32-bit controllers in two ways:
1.
As the basis for Rapid Development Kits which serve as a reference and evaluation platform.
2.
As insert-ready, fully functional phyCORE OEM modules, which can be embedded directly into the user's
peripheral hardware design.
Implementation of an OEM-able SOM subassembly as the "core" of your embedded design allows you to focus on
hardware peripherals and firmware without expending resources to "re-invent" microcontroller circuitry. Furthermore,
much of the value of the phyCORE module lies in its layout and test.
Production-ready Board Support Packages (BSPs) and Design Services for our hardware further reduce development time
and expenses. Take advantage of PHYTEC products to shorten time-to-market, reduce development costs, and avoid
substantial design issues and risks. For more information go to:
http://phytec.com/contact/
