manualshive.com logo in svg

Phytec nanoModul-164, Quick Start Instructions

Share
Download
Phytec nanoModul-164 Quick Start Instructions Download Page 57

Getting more Involved

                                                                                                                                                

                                                                                                                                                

 PHYTEC Meßtechnik GmbH 2003     L-379e_4

53

3.4

 

Saving the Modifications

•

 

Save the modified file by choosing File|Save or by clicking the
floppy disk icon

.

Note that the icon is active as soon as you modify the file.

3.5

 

Setting Options for Target

Keil includes a Make utility that can control compiling and linking
source files in several programming languages. Before using the
Make utility, macroassembler, C compiler or linker you must
configure the corresponding options. Most of the options are set by
specifying the device for the project. Only the external memory and
output options must be set.
Enter the changes as indicated below and leave all other options set to
their default values. 

µ

Vision2 allows you to set various options with

mouse clicks and these are all saved in your project file.

Summary of Contents for nanoModul-164

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands