Phytec nanoModul-164, Quick Start Instructions

Page: 42 / 96

nanoMODUL-164 QuickStart Instructions
38 
PHYTEC Meßtechnik GmbH 2003 L-379e_4
•
At the end of the download, a sector by sector status check of the
Flash-Memory can be viewed in the left-hand corner of the
FlashTools for Windows Worksheet window. Wait until the status
check finishes before returning to work with the board. Once the
status check is complete, the downloaded code can be executed.
If the selected Flash bank into which you wish to download code is
not empty (i.e. erased), a warning dialog box will appear, indicating
“Location not empty! Please erase location and try again.” In this
event, select the Sector Erase tab from the FlashTools for Windows
worksheet, highlight Sector #0 and erase the sector. Then repeat the
download procedure.
•
Returning to the Communication Setup tab, click on the Disconnect
button and exit the Flashtools.
Monitoring the execution of the QuickStart demo requires use of a
terminal program, such as the HyperTerminal program included
within Windows.
•
Start the HyperTerminal program within the Windows
Programs|Accessories
bar.
•
The HyperTerminal main window will now appear:
•
Double-click on the HyperTerminal icon ‘Hyperterm’ to create a
new HyperTerminal session.