Phytec nanoModul-164, Quick Start Instructions

Page: 41 / 96

Getting Started

PHYTEC Meßtechnik GmbH 2003 L-379e_4
37
2.3.3.1 “Hello“
The “Hello” example downloads a program to the Flash that, when
executed, performs an automatic baud rate detection and sends a
character string from the target hardware back to the host-PC. The
character string can be viewed with a Terminal Emulation program.
•
Choose the Sector Utilities tab, highlight Sector #0 and click on the
Erase Sector(s) button. You can see the Flash sector(s) being
erased at the bottom left hand of the window. When the desired
sectors are erased, the connection properties description returns to
the lower left corner of the window.
•
Choose the File Download tab, and click on the File Open…
button.
•
The hexfile has already been installed to your hard-drive during the
installation procedure. Type in the correct drive and path to the
nanoMODUL-164 Demo directory (default location
C:\PHYBasic\nM164\Demos\Keil\Hello\hello.h86) and click
Open.
•
Click on the Download button. You can watch the status of the
download of the hello.h86 into external Flash-Memory in the
Download window.