Phytec nanoModul-164, Quick Start Instructions

Page: 29 / 96

Getting Started

PHYTEC Meßtechnik GmbH 2003 L-379e_4
25
2.3.2.1 “Hello“
The ‘Hello’ example downloads a program to the Flash that, when
executed, initialices the serial port to 9600 baud and sends a character
string from the target hardware back to the host-PC. The character
string can be viewed with a terminal emulation program.
•
From the FlashTools main menu enter ‘2’ to choose the Erase
entire Flash-Area command and select ‘Y’ to confirm erasure of
unprotected sectors of Flash memory. You can see the Flash sectors
being erased in the FlashTools window. When all sectors are
erased, the main menu reappears.
•
Enter ‘4’ to choose the Load INTEL-hexfile command and press
function key <F2> to specify the input file for download.
•
The hexfile has already been installed on your hard disk during the
installation procedure. Enter the correct drive and path to the
nanoMODUL-164 Demo file (default location
C:\PHYBasic\nM164\Demos\Keil\Hello\hello.h86). After pressing
the <Return> key the download starts immediately and you can
watch the process of the download as the code spills across the
FlashTools window as it transmits via the RS-232 connection from
the host to the on-board Flash
:
If you have a nanoModul-164 with 1 MB SRAM or 1 MB Flash
use the Demo file at the default location
C:\PHYBasic\nM164\Demos\Keil\Hello\HelloMx\hello.h86).