Photon Focus Luxima DR4-D1280-L01-FB, User Manual, Page: 13 / 151

2
Introduction
2.1 Introduction
This manual describes standard Photonfocus MV4 Luxima series cameras that have a Gigabit
Ethernet (GigE) or a 10 Gigabit Ethernet Copper (GT) or Fibre (FB) interface. The cameras
contain the CMOS image sensor LUX1310 and LUX2100 from Luxima.
DR cameras use a proprietary coding algorithm to double the maximal frame rate compared
to a standard GigE camera over one GigE cable.
2.2 Camera Naming Convention
The naming convention of the MV4 Luxima camera series is summarized in Fig. 2.1.
M V 4 - D 1 2 8 0 C - L 0 1 - G 2
P r e f i x 1
P r e f i x 2
S e n s o r w i d t h
( o p t i o n a l )
S e n s o r t y p e
I n t e r f a c e
t y p e
S e n s o r
M a n u f a c t u r e r
S e n s o r
F a m i l y
Figure 2.1: Camera naming convention
Prefix1 Camera platform and usage prefix. The following prefix are available for this camera
series: MV4 with form factor 59mmx59mm. DR cameras have DR4 as Prefix1.
Prefix2 Camera family specifier. The following specifiers are used in this manual: "D": digital
standard area scan cameras
Sensor width Width of image sensor of the camera in pixels.
Sensor type Sensor types specification: "C": color cameras. Cameras without sensor type
specifier have a standard monochrome sensor.
Sensor Manufacturer Sensor manufacturer. "L": Luxima
Sensor Family
Sensor family of the prior indicated manufacturer. "01": LUX series
Interface type
Interface type specification: "CL": CameraLink
®
, "G2": Gigabit Ethernet (GigE
Vision), "GT": 10 Gigabit Ethernet Copper (GigE Vision), "FB": 10 Gigabit Ethernet Fibre
(GigE Vision).
2.3 Camera list
A list of all cameras covered in this manual is shown in Table 2.1.
MAN085 04/2021 V1.3 13 of 151