![background image](http://html1.mh-extra.com/html/phonic/is16v1/is16v1_user-manual_1552796020.webp)
16
IS16
English
2.3 Meter / Fader Tab
The Meter section in the Meter / Fader Tab allows users to easily adjust levels of each input channel and AUX and Group mix, as well as
the main mix. Found directly next to each of these virtual faders is a level meter. Level meters can be changed between pre and post by
pushing the appropriate pre/post buttons on the right-hand side of the display. The input channels’ meters can be adjusted to display the
input signal (post-gain, pre-on/off), pre-fader (post-gain, post-on/off) and post-fader (post-fader, -EQ, -dynamics, -delay). If any two input
channels are paired (achieved through the Setup menu) these will be indicated as such by a small chain image located between the two
channels’ controls/meters.
When two channels are paired this is indicated in the menu FADER by a red triangle in the upper right corner of both channels, and the “slave”
channel is grey.
2.4 Multi Tab
The Multi tab of the meter function displays the input and output signals of the Multi signals, EFX signals, the AES/EBU signals, and Control
Room output. The menu also provides a number of different controls to users. All Multi outputs can be turned on and off and have their
levels adjusted. The main stereo mix can have its level adjusted. The EFX signals can be turned on and off and have their output levels
adjusted. The Control Room trim can be adjusted. The trim can be adjusted on the AES/EBU input, which can also be turned on and off
within this menu. If no digital device is connected to the input, users will not be able to activate the AES/EBU inputs.
You can also view the status of dynamic processors assigned to the corresponding multi outputs by viewing this window. Each the expander,
gate, compressor and limiter have their own indicator for each multi output. A red light indicates that the corresponding dynamic process is
off; a blue light indicates that the corresponding dynamic process is turned on, and; a yellow light indicates that the corresponding dynamic
process is currently active (ie. the set threshold has been passed).
Summary of Contents for IS16v1
