Phoenix MicroATX Express Installation Manual Download

Page: 8 / 72

Phoenix MicroATX Express – Installation Guide

•

Eight Universal Serial Bus ports, USB 1.1 and USB 2.0 compliant. Four connectors and four headers

•

Two 32-bit PCI slots, one PCI Express x16 dedicated graphics slot and one PCI Express x4 slot.

•

One (optional two) PCI Express based Gigabit Ethernet controllers.

•

Automatic CPU voltage & temperature monitoring device.

•

On-board Buzzer.

•

Intel HD Audio. Microphone In, Stereo Line In and Out, Aux In and CD In.

ROM BIOS

•

American Megatrends AMIBIOS8 with FLASH ROM.

On-Board CRT video controller

•

Standard CRT video controller (Intel 945G chipset).

Conventions Used in this Manual

Notes - Such as a brief discussion of memory types.

Important Information - such as static warnings, or
very important instructions.

When instructed to enter keyboard keystrokes, the
text will be noted by this graphic.

StockCheck.com

Downloaded from StockCheck.com

Summary of Contents for MicroATX Express









































































Search results

Summary of Contents for MicroATX Express

Reviews:

Related manuals for MicroATX Express

Brands by name

Popular brands

Phoenix MicroATX Express, Installation Manual

Search results

Summary of Contents for MicroATX Express

Reviews:

Related manuals for MicroATX Express

Brands by name

Popular brands