Chapter 1: Pre-Configuration
Intel Reference Thermal Solution Assembly
NOTE:
Depending on the configuration, Thermal Solution Integration procedure could perform with M/B alone or
with M/B in the Chassis.
1.
2.
3.
4.
5.
Place motherboard on support structure providing
minimum 0.150-inch backside clearance
Apply 300 mg of Thermal Interface Material onto center
of IHS
NOTE: Thermal Solutions that come with IntelR boxed
processor use pre-applied thermal interface material and not
grease.
Remove Heat Sink (HS) from packaging media
Place HS onto the LGA775 Socket
•
Ensure fan cables are oriented on side closest to fan
header
•
Align Fasteners with MB through-holes
0.150-inch backside
clearance for fastener
installation
Fan cabled on side
closest to MB header
Fastener slots
pointing straight out
Apply Thermal
Interface Material
Inspection
•
Ensure cables are not trapped or interfere fastener
operation
•
Ensure fastener slots are pointing straight out from
heatsink
9
Fastener flush
against MB
Fastener Cap not
resting against spring
StockCheck.com
Downloaded from StockCheck.com
Summary of Contents for MicroATX Express
