![background image](http://html.mh-extra.com/html/phoenix/microatx-express/microatx-express_installation-manual_1551261038.webp)
Phoenix MicroATX Express – Installation Guide
Use this screen to view the hard disk drives in the system. To access this screen, select Hard disk drives on the Boot
Setup screen and press <Enter>.
REMOVABLE DEVICES
Removable Devices
Use this screen to view the removable drives attached to the system. To access this screen, select Removable
Devices on the Boot Setup screen and press <Enter>.
ATAPI CDROM DRIVES
ATAPI CD-ROM Drives
Use this screen to view the ATAPI CD-ROM drives in the system. To access this screen, select ATAPI CDROM
Drives on the Boot Setup screen and press <Enter>.
Security Setup
ezPORT Password Support
Two Levels of Password Protection
ezPORT provides both a Supervisor and a User password. If you use both passwords, the Supervisor password must
be set first. The system can be configured so that all users must enter a password every time the
system boots or when ezPORT Setup is executed, using either or either the Supervisor password or User password.
The Supervisor and User passwords activate two different levels of password security. If you select password
support, you are prompted for a one to six character password. Type the password on the keyboard. The password
does not appear on the screen when typed. Make sure you write it down. If you forget it, you must drain NVRAM
and reconfigure.
Remember the Password
Keep a record of the new password when the password is changed. If you forget the password, you must erase the
system configuration information in NVRAM. See (Deleting a Password) for information about erasing system
configuration information.
Select Security Setup from the ezPORT Setup main BIOS setup menu. All Security Setup options, such as password
protection and virus protection, are described in this section. To access the sub menu for the following items, select
the item and press <Enter>:
•
Change Supervisor Password
•
Change User Password
•
Clear User Password (Note: If the User Password is not installed, the
“Clear User Password
” will not
displayed.)
(Note: If the “Supervisor Password” installed, and the “User Password” not installed, the following will be
displayed.)
•
Change supervisor Password
•
User Access Level
[Full Access]
The default setting is
Full Access.
Options: No Access
View Only
Limited
Full Access
•
Change User Password
•
Password Check
[Setup]
The default setting is
Setup.
Options: Setup
Always
30
StockCheck.com
Downloaded from StockCheck.com
Summary of Contents for MicroATX Express
