Phoenix MicroATX Express Installation Manual Download

Page: 36 / 72

Phoenix MicroATX Express – Installation Guide

Quiet Boot

Set this value to allow the boot up screen options to be modified between POST messages or OEM logo. The
Optimal and Fail-Safe default setting is

Enabled.

Disabled

Set this value to allow the computer system to display the POST messages.

Enabled

Set this value to allow the computer system to display the OEM logo. This is the default setting.

Add-On ROM Display Mode

Set this option to display add-on ROM (read-only memory) messages. The Optimal and Fail-Safe default setting is

Force BIOS

. An example of this is a SCSI BIOS or VGA BIOS.

Force BIOS

Set this value to allow the computer system to force a third party BIOS to display during system boot.

This is the default setting.

Keep Current

Set this value to allow the computer system to display the ezPORT information during system boot.

Boot up Num-Lock

Set this value to allow the Number Lock setting to be modified during boot up. The Optimal and Fail-Safe default
setting is

On.

Off

This option does not enable the keyboard Number Lock automatically. To use the 10-keys on the keyboard, press

the Number Lock key located on the upper left-hand corner of the 10-key pad. The Number Lock LED on the keyboard
will light up when the Number Lock is engaged.

Set this value to allow the Number Lock on the keyboard to be enabled automatically when the computer system is

boot up. This allows the immediate use of 10-keys numeric keypad located on the right side of the keyboard. To
confirm this, the Number Lock LED light on the keyboard will be lit.

PS/2 Mouse Support

Set this value to allow the PS/2 mouse support to be adjusted. The Optimal and Fail-Safe default setting is

Auto

Disabled

This option will prevent the PS/2 mouse port from using system resources and will prevent the port from

being active. Use this setting if installing a serial mouse.

Enabled

Set this value to allow the system to use a PS/2 mouse. This is the default setting.

Wait for ‘F1’ If Error

Set this value to allow the Wait for ‘F1’ Error setting to be modified. The Optimal and Fail-Safe default setting is

Enabled

Disabled

This prevents the ezPORT to wait on an error for user intervention. This setting should be used if there is a

known reason for a BIOS error to appear. An example would be a system administrator must remote boot the system.
The computer system does not have a keyboard currently attached. If this setting is set, the system will continue to boot
up in to the operating system. If ‘F1’ is enabled, the system will wait until the BIOS setup is entered.

Enabled

Set this value to allow the system BIOS to wait for any error. If an error is detected, pressing <F1> will enter

Setup and the BIOS setting can be adjusted to fix the problem. This normally happens when upgrading the hardware
and not setting the BIOS to recognize it. This is the default setting.

Hit ‘DEL’ Message Display

Set this value to allow the

Hit “DEL” to enter Setup

Message Display to be modified. The Optimal and Fail-Safe

default setting is

Enabled

Disabled

This prevents the ezPORT to display

Hit Del to enter Setup

during memory initialization. If Quiet Boot is enabled, the Hit ‘DEL’ message will not display.

Enabled

This allows the ezPORT to display