background image

 

 

Appendix D: On-Board Video

 

Appendix  

On-Board Video Controller 

The Phoenix MicroATX Express has an On-board video controller.  The On-board video controller is based on the 
Intel 945G GMCH. 

Graphics Features 
 
Intel 945G Graphics Subsystem 

The Intel 945G chipset contains two separate, mutually exclusive graphics options. Either the GMA950 graphics 
controller (contained within the 82945G GMCH) is used, or a PCI Express x16 add-in card can be used. When a PCI 
Express x16 add-in card is installed, the GMA950 graphics controller is disabled. 
 

Intel

® 

GMA950 Graphics Controller 

The Intel GMA950 graphics controller features the following: 
. 400 MHz core frequency 
. High performance 3-D setup and render engine 
. High quality texture engine 

. DX9* Compliant Hardware Pixel Shader 2.0 
. Alpha and luminance maps 
. Texture color-keying/chroma-keying 
. Cubic environment reflection mapping 
. Enhanced texture blending functions 

. 3D Graphics Rendering enhancements 

. 1.3 Dual Texture GigaPixel/Sec Fill Rate 
. 16 and 32 bit color 
. Maximum 3D supported resolution of 1600 x 1200 x 32 at 85 Hz 
. Vertex cache 
. Anti-aliased lines 
. OpenGL* version 1.4 support with vertex buffer and EXT_Shadow extensions 

. 2D Graphics enhancements 

. 8, 16,and 32 bit color 
. Optimized 256-bit BLT engine 
. Color space conversion 
. Anti-aliased lines 

. Video 

. Hardware motion compensation for MPEG2 
. Software DVD at 30 fps full screen 

. Display 

. Integrated 24-bit 400 MHz RAMDAC 
. Up to 2048 x 1536 at 75 Hz refresh (QXGA) 
. DDC2B compliant interface 
. With Advanced Digital Display 2 or 2+ (ADD2/ADD2+) cards, support for TV-out / TV-in and DVI 
digital display connections 
. Supports flat panels up to 2048 x 1536 at 60Hz or digital CRT/HDTV at 1920 x 1080 at 85 Hz (with 
ADD2/ADD2+) 
. Two multiplexed DVO port interfaces with 200 MHz pixel clocks using an ADD2/ADD2+ card 

. Dynamic Video Memory Technology (DVMT) support up to 224 MB 
. Intel® Zoom Utility 
 

Dynamic Video Memory Technology (DVMT) 

DVMT enables enhanced graphics and memory performance through Direct AGP, and highly efficient memory 
utilization. DVMT ensures the most efficient use of available system memory for maximum 2-D/3-D graphics 
performance. Up to 224 MB of system memory can be allocated to DVMT on systems that have 512 MB or more of 
total system memory installed. Up to 128 MB can be allocated to DVMT on systems that have 256 MB but less than 
512 MB of total installed system memory. Up to 64 MB can be allocated to DVMT when less than 256 MB of 

 

60

 

StockCheck.com

Downloaded from StockCheck.com

Summary of Contents for MicroATX Express









































































Reviews: