Phoenix Contact THERMOMARK ROLL 2.0 User Manual Download Page 51

PHOENIX CONTACT

51 / 52

Please observe the following notes

General Terms and Conditions of use for technical documentation

Phoenix Contact reserves the right to alter, correct, and/or improve the technical 

documentation and the products described in the technical documentation at its own 

discretion and without giving prior notice, insofar as this is reasonable for the user. The 

same applies to any technical changes that serve the purpose of technical progress.

The receipt of technical documentation (in particular user documentation) does not 

constitute any further duty on the part of Phoenix Contact to furnish information on 

modifications to products and/or technical documentation. You are responsible to verify the 

suitability and intended use of the products in your specific application, in particular with 

regard to observing the applicable standards and regulations. All information made 

available in the technical data is supplied without any accompanying guarantee, whether 

expressly mentioned, implied or tacitly assumed. 

In general, the provisions of the current general Terms and Conditions of Phoenix Contact 

apply exclusively, in particular as concerns any warranty liability.

This manual, including all illustrations contained herein, is copyright protected. Any 

changes to the contents or the publication of extracts of this document are prohibited.

Phoenix Contact reserves the right to register its own intellectual property rights for the 

product identifications of Phoenix Contact products that are used here. Registration of such 

intellectual property rights by third parties is prohibited.

Other product identifications may be afforded legal protection, even where they may not be 

indicated as such.

Summary of Contents for THERMOMARK ROLL 2.0























































Reviews: