Phoenix Contact THERMOMARK ROLL 2.0, User Manual

Page: 22 / 54

THERMOMARK ROLL 2.0
22 / 52
PHOENIX CONTACT 108716_en_01
Setting up interfaces
Setting up Ethernet
Entering the host name
Unique designation for the printer in the network
DHCP, method for assigning the IP address
On
On: Dynamic assignment of the IP address by the DHCP server
Off: Direct assignment of the IP address by the operator
Entering the IP address
IP address of the label printer. Only visible when no DHCP server is active
–
Entering the network mask
Subnet mask of local network
–
Switching on the gateway
Connection between local and other networks
Off
Setting up WLAN
Only visible when a WLAN stick is inserted
Activating the WLAN interface
Off
Search and selection of the access point to be used to establish the WLAN
connection
–
DHCP, method for assigning the IP address
On
On: Dynamic assignment of the IP address by the DHCP server
Off: Direct assignment of the IP address by the operator (see “Setting
up Ethernet” )
Network services
Website
Activating the HTTP protocol for access to the printer-internal website
(see “Configuration via the website” )
On
Printer behavior in case of error messages
On: After an error message, the last label is printed again On
Off: After an error message the next label is printed
In case of problems with the network connection, the printer is set to the error state On
Off: The printer ignores network problems
Table 3-1 Menu structure
Menu Setting option [...] Default